China high quality 6309/6310 Stainless Steel Deep Groove Ball Bearing for Medical Equipment/Household Appliances/Fishing Wheels/Railway Vehicle/Threshing Machine/Bulldozer/Gearbox bearing example

Product Description

Product Description

Deep Groove Ball Bearing is the most widely used rolling bearing. Its characteristics are low frictional resistance, high rotational speed, and can be used for bearing radial loads or combined radial and axial loads, as well as for bearing axial loads, such as low-power electric motors, car and tractor gearboxes, machine tool gearboxes, general machines, tools, etc.

Product Description
1.The bearing steel material has good processing performance, is not easy to rust, and has a long service life.
2. High speed, low friction coefficient, high limit speed
3. Excellent process with high load capacity, strong load capacity.
4. All models available, with multiple specifications and models available for selection.
5. Strictly prevent foreign objects from invading.
6. Stable performance.
7. The surface gap is rigorous, flat, and has high rotational speed and is not easy to burn.
8. High cost-effectiveness. For equipment with high requirements and difficulty in disassembly and assembly, it can save costs and have high cost-effectiveness.

Precautions for installation of deep groove ball bearing

1.Avoid strong impact since the contact surface between the bearing raceway surface and the rolling element is close to point contact. Excessive impact force will cause indentation on the contact surface,so knock or drop impact must be avoided.

2.Avoid dust entering the bearing.If dust enters the bearing during use the raceway surface and rolling element surface will be damaged, resulting in abnormal noise or poor rotation of the bearing.

Product parameters

Deep Groove Ball Bearing 6000 Series
Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)
Bore Outer Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant
d D B
6000 Series
606 6 17 6 1.95 0.72 30000 38000 0.0057
607 7 19 6 2.88 10.80 28000 36000 0.0071
608 8 22 7 3.32 1.38 26000 34000 0.011
609 9 24 7 3.35 1.40 22000 30000 0.014
6000 10 26 8 4.58 1.98 20000 28000 0.018
6001 12 28 8 5.10 2.38 19000 26000 0.02
6002 15 32 9 5.58 2.85 18000 24000 0.026
6003 17 35 10 6.00 3.25 17000 22000 0.036
6004 20 42 12 9.38 5.02 15000 19000 0.069
6005 25 47 12 10.10 5.85 13000 17000 0.075
6006 30 55 13 10.18 6.91 10000 14000 0.116
6007 35 62 14 12.47 8.66 9000 12000 0.155
6008 40 68 15 13.10 9.45 8500 11000 0.185
6009 45 75 16 16.22 11.96 8000 10000 0.231
6571 50 80 16 16.94 12.95 7000 9000 0.250
6011 55 90 18 23.28 17.86 7000 8500 0.362
6012 60 95 18 24.35 19.35 6300 7500 0.385
6013 65 100 18 24.66 19.74 6000 7000 0.410
6014 70 110 20 29.68 24.20 5600 6700 0.575
6015 75 115 20 30.91 26.06 5300 6300 0.603
6016 80 125 22 36.57 31.36 5000 6000 0.921
6017 85 130 22 39.04 33.75 5000 6000 0.848
6018 90 140 24 44.63 39.16 4800 5600 1.103
6019 95 145 24 44.45 39.16 4500 5300 1.156
6571 100 150 24 49.58 44.08 4300 5300 1.174
6571 105 160 26 55.32 49.77 4000 4800 1.520
6571 110 170 28 62.99 57.39 3800 4500 1.891

Deep Groove Ball Bearing 6200 Series
Bearing No. Shape Dimensions (mm) Basic Load Rating (KN) Max Speed (RPM) Weight(kg)
Bore Outer Width Dynamic Cr Static Cor Grease  lubricant Oil lubricant
d D B
6200 Series
623 3 10 4 0.5 0.2156 38000 48000 0.0015
624 4 13 5 1.15 0.40 36000 45000 0.0032
625 5 16 5 1.88 0.68 32000 40000 0.0048
626 6 19 6 2.8 1.05 28000 36000 0.0075
627 7 22 7 3.28 1.35 26000 34000 0.012
628 8 24 8 3.35 1.40 24000 32000 0.017
629 9 26 8 4.45 1.95 22000 30000 0.019
6200 10 30 9 5.1 2.38 19000 26000 0.571
6201 12 32 10 6.82 3.05 18000 24000 0.034
6202 15 35 11 7.65 3.72 17000 22000 0.043
6203 17 40 12 9.58 4.47 16000 20000 0.062
6204 20 47 14 9.88 6.20 14000 18000 0.102
6205 25 52 15 10.78 6.98 12000 16000 0.120
6206 30 62 16 14.97 10.04 9500 13000 0.190
6207 35 72 17 19.75 13.67 8500 11000 0.270
6208 40 80 18 22.71 15.94 8000 10000 0.370
6209 45 85 19 24.36 17.71 7000 9000 0.380
6210 50 90 20 26.98 19.84 6700 8500 0.450
6211 55 100 21 33.37 25.11 6000 7500 0.603
6212 60 110 22 36.74 27.97 5600 7000 0.789
6213 65 120 23 44.01 34.18 5000 6300 0.990
6214 70 125 24 46.79 37.59 4800 6000 1.084
6215 75 130 25 50.85 41.26 4800 5600 1.171
6216 80 140 26 55.04 45.09 4500 5300 1.448
6217 85 150 28 64.01 53.28 4300 5000 1.803
6218 90 160 30 73.83 60.76 4000 4800 2.172
6219 95 170 32 84.83 70.85 3800 4500 2.620
6220 100 180 34 93.95 79.35 3600 4300 3.189
6221 105 190 36 102.30 89.59 3400 4000 3.782
6222 110 200 38 110.82 100.43 3200 3800 4.421

Advantages
1. GUARANTEED QUALITY
Materials with good quality are selected and tested layer by layer.

2. GOOD SERVICE
We have enthusiastic and timely online service and good after-sales service.

3. PROFESSIONAL TEAMS
We have professional teams with technology, research and production.

4. COMPETITIVE PRICE
We provide customers with better products and competitive prices.

Packaging & Shipping

Packaging 1)Original package
2) Single box + outer carton 
3)Tube package + outer carton 
4)Customized according to customer needs
Shipping 1)Ocean shipping
2)Air transport
3)Select according to customer needs
 

Company Profile

ZheJiang Dente International Trade Co., Ltd. is a comprehensive enterprise with self operated import and export rights and production bases. The company is located in HangZhou, the “Kite Capital of the World”, and its production base is located in HangZhou, the largest bearing wholesale base in China.
The company’s leading products include Deep Groove Ball Bearing, tapered roller bearings, external spherical bearings, self-aligning ball bearings, self-aligning roller bearings, cylindrical roller bearings, thrust ball bearings and automobile non-standard bearings, stainless steel bearings, various needle bearings, inch bearings, non-standard bearings, special bearings and other series of varieties, as well as world famous brand imported bearing products.

With the advantages of reasonable price, excellent quality, and short delivery time, the company’s products have been exported to more than 50 countries and regions in the world, such as Europe, the Americas, Australia, and Africa. In addition to having its own production base, the company also has more than 500 cooperative factories to meet the various needs of different customers.
Our company is famous for its professional service attitude, collective spirit of unity and dedication, and pragmatic and efficient work style in this field. Value determines price. We will provide customers with high-quality products and services with the best quality, and look forward to our CZPT cooperation!

Testing Equipment
Company testing center is equipped with professional testing equipment to enhance the ability of controlling technical indicators. And improving product qualification rate.

DNT Bearing is a comprehensive bearing manufacturing and service provider with world leading bearing manufacturing processes and management technologies in China. We sell a variety of bearing products with international standards and technical levels of low noise, high load, high accuracy, and long service life. We have cooperation with many internationally renowned bearing enterprises, welcome to consult!

 

FAQ

1. What’s the minimum order quantity of your company?
Our minimum order is 1 set.
2. Can you accept OEM and customize it?
Yes, we can customize it for you according to the samples or drawings.
3. Can you provide samples for free?
Yes, we can provide samples free of charge, but we need our customers to bear the freight.
4.Is your company a factory or a trading company?
We are a professional bearing factory.
5.Can you tell me the delivery time of your goods?
7-15 days, mainly depending on the quantity of your order.

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Contact Angle: All Type
Aligning: Non-Aligning Bearing
Separated: Unseparated
Samples:
US$ 2.99/Piece
1 Piece(Min.Order)

|

Order Sample

Chrome Steel
Customization:
Available

|

Customized Request

bearing

Types of Ball Bearings

There are many types of Ball Bearings available on the market, but which one is best for your application? Here, we will discuss the differences between Angular contact, Single-row, High-carbon steel, and Ceramic ball bearings. These types of bearings also feature races, or a groove in the center of each. These races are important in keeping the balls contained within the cylinder. They also provide a groove-baed pathway.

Ceramic

The ceramic ball used in ball bearings has many advantages. It is lightweight, operates at lower temperatures, has reduced skidding, and is resistant to electrolysis. The ball also exhibits longer fatigue life. All of these factors make the ceramic ball a good choice for many applications. But, how do you know if a ceramic ball bearing is right for your application? Read on to discover why ceramic ball bearings are a better choice than steel or stainless steel ones.
The ceramic balls are 40% more dense than steel. This means less centrifugal force is generated on the bearing, which suppresses heat generation. Because of this reduced friction, ceramic bearings are more efficient at transferring energy. Compared to steel bearings, ceramic balls have longer life spans. Nonetheless, these ceramic balls aren’t as strong as steel. Therefore, it is important to understand the limitations of the ceramic ball bearing before buying one.
The ceramic materials used for ball bearings are resistant to micro-welding. Metals undergo this process when imperfections in the surfaces interact. Eventually, this results in a brittle ball that reduces the life of a bearing. Unlike metals, ceramic materials have a stable behavior at high temperatures and exhibit less thermal expansion. This means that they can be used for applications where lubrication isn’t an option.
While steel balls can easily absorb contaminants and foreign particles, the ceramic ball is insensitive to this, and doesn’t require lubrication. This means they’re not susceptible to corrosion and other common problems. These are just a few reasons why ceramics are a better choice. This technology has a wide range of uses. It’s easy to see why it is so popular. If you’re looking for a new bearing for your application, be sure to contact an AST Applications Engineer. They can analyze your operating conditions and potential failure modes.

Angular contact

An Angular Contact Ball Bearing (also known as an angular-contact bearing) has an axial component that is generated when radial loads are applied. They are generally used in pairs, triplex sets, or quadruplex sets. These bearings are also available with Super Finished Raceways to reduce noise and improve lubricant distribution. Angular contact ball bearings have various design units, such as bore size, outer diameter, and outer ring width.
A single-row angular contact bearing has a radial contact angle that is equal to the angular distance between the two rings. Double-row angular bearings are designed for two-way thrust capability. These types of bearings can be purchased at Grainger and other online retailers. A typical angular contact bearing will last up to a million revolutions. They are often used in industrial angular contact bearings.
Single-row angular contact ball bearings feature a set contact angle. These bearings can support radial and axial loads, but they can’t withstand high speeds. Single-row angular contact ball bearings may also have one or two shoulders relieved. Thrust load is a pressure placed on the bearing when it is installed in an assembly, and it is used to create an angle between the races.
Angular contact ball bearings come in single and double-row configurations. They differ in the axial load they can carry and the type of lubrication they use. Angular contact ball bearings are ideal for high-speed applications and can accommodate both radial and axial loads. The type of contact and lubrication used in angular-contact ball bearings depends on the intended use for the bearing.
bearing

High-carbon steel

Carbon steel is a low-alloy and high-carbon steel used in bearings. This material provides superior strength and fatigue properties for ball and roller bearings. Its mechanical properties are ideal for applications where the temperature is less than 400 degrees Fahrenheit. High-carbon steel is also used to make bearing components for chrome steel bearings. These types of steels are softer than chrome steel but provide superior durability in applications where the material is exposed to severe conditions.
Hardened carbon steel balls with an AISI 1015 hardness index are used in a variety of automotive, commercial, and semi-precision applications. In addition to automotive applications, they are also used in slides, trolleys, and conveyors. AISI 1015 carbon steel balls are used in bearings. They can be purchased in a variety of weights and diameters. Carbon steel balls can also be purchased in nickel-plated or uncoated varieties for decorative purposes.
In order to determine whether a ball bearing is made of high-carbon steel, the material must be tested for its hardness. An ordinary pocket magnet will work well, but an ordinary rare earth magnet isn’t powerful enough to measure the hardness. If it attracts the magnet strongly, the metal is steel, while a weak magnet indicates a non-ferrous material. A hardness test requires a special microhardness test.
A lower-carbon steel is another option. Some miniature bearing manufacturers use a material with less carbon than AISI 440C. This material is also known as KS440 or X65Cr13. After being heat-treated, it develops smaller carbides, resulting in superior low-noise characteristics and the same corrosion-resistance as 440C. These materials are a less expensive alternative than chrome steel, but they are often less durable than chrome alloy steel.

Single-row

Single-row angular contact ball bearings accommodate axial loads in one direction. These are normally adjusted against a second bearing. Unlike other ball bearings, they are non-separable and contain an upper and lower shoulder. Single-row ball bearings are made of Chromium Steel (GCr15) which is heat-treated to achieve high uniform hardness and excellent wear resistance. They are the most commonly used type of bearings in the world.
Because of the angular contact between the radial plane and the raceway, single-row ball bearings transmit radial forces from raceway to raceway. A higher a, the greater the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are ideal for high axial loads. However, they have limited preload capabilities and must be installed in pairs. Hence, they are best used for applications where axial forces must be distributed.
Single-row ball bearings can be pre-lubricated and have steel shields. They are also available with rubber seals or snap rings on the outside edge. They are available with various retainers, including pressed steel cages, plastic shields, and rubber seals. A tapered bore is also available upon request. They are ideal for applications where space is limited. The 6200 series of bearings are especially well suited for electrical motors, dental hand tools, and optical encoders.
Single-row angular contact ball bearings are widely used for axial loads. The outer and inner rings have slightly larger radii than the balls. These bearings can accommodate high speeds and low torque. They can also be supplied with different grease levels. If grease is needed, you can choose a lubricant that has different characteristics depending on the application. They are easy to install and maintain. However, they are not recommended for adjacent mounting.
bearing

Plastic

A plastic ball bearing is a highly versatile component that can be mounted in a variety of components, including wheels, pulleys and housings. The outer ring of a plastic bearing is usually the pulley profile. The inner ring can be made of a shaft or polymer. The integrated design of a plastic ball bearing helps to reduce assembly time and cost. Here are some of the benefits of this type of bearing:
First and foremost, plastic balls are lighter than metal balls. They also have less magnetic properties than steel balls, making them the best option for applications requiring low weight and noise. Glass balls are also lighter than stainless steel balls, making them the ideal metal-free choice. They are also very corrosion-resistant, which makes them a great choice for some applications. In addition to being lightweight, polymer ball bearings are also quiet. And because of their low weight, plastic ball bearings are ideal for applications that require fast speed.
Another advantage of plastic bearings is their ability to withstand high temperatures. This material is also abrasion and corrosion-resistant. It meets FDA and USDA acceptance requirements. Aside from its abrasion-resistant and corrosion-resistant properties, these plastics do not transfer heat. Aside from being extremely durable and flexible, most plastics are also self-lubricating. Common plastics include phenolics, acetals, nylon, and ultra high molecular weight polyethylene. Nonetheless, plastics have limitations, and these materials may be damaged by extreme temperatures or cold flow under heavy loads.
Other advantages of plastic ball bearings include their low density, high hardness and low friction coefficient, and ability to withstand heat and corrosion. Ceramics are also lightweight, non-conductive, and have superior resistance to friction. These products can withstand temperatures up to 1,800 degrees Fahrenheit. If you’re in the market for a plastic ball bearing, it’s important to choose the right type of material. And if you’re looking for a high-quality bearing, look no further.

China high quality 6309/6310 Stainless Steel Deep Groove Ball Bearing for Medical Equipment/Household Appliances/Fishing Wheels/Railway Vehicle/Threshing Machine/Bulldozer/Gearbox   bearing exampleChina high quality 6309/6310 Stainless Steel Deep Groove Ball Bearing for Medical Equipment/Household Appliances/Fishing Wheels/Railway Vehicle/Threshing Machine/Bulldozer/Gearbox   bearing example
editor by CX 2023-04-23