Tag Archives: tnt bearing

China Original Japan TNT Taper Roller Bearing 4T- 4616246368 with Size 41.2893.6631.75mm bearing driver

Kind: Roller
Construction: Taper
Relevant Industries: Production Plant, Equipment Mend Outlets, Retail, Building works , Energy & Mining
Design Quantity: 4T- 46162/46368
Precision Ranking: P0 P6 P5 P4 P2
Seals Kind: Open up
Variety of Row: Single row
Content: Chrome Steel
Software: Automotive.tractor.design Machinery.rolling Mill
Characteristic: Lengthy Lifestyle Higher Velocity
Support: OEM Tailored Solutions
Package: Authentic Packing
Samples: Availble
Shipping and delivery: 1-3 Times
Product: 4T- 46162/46368
Measurement: forty one.28*ninety three.66*31.75mm
Manufacturer: NTN
Packaging Specifics: 1.Commercial packaging: 1pc/plastic bag + color box + carton + pallet 2.Industrial packaging: plastic tube + carton + pallet 3.According to the requirement of consumer.

First Japan TNT Taper Roller Bearing 4T- 46162/46368 with Measurement 41.28*93.sixty six*31.75mm
These taper roller bearings consist of 4 major factors: cup, cone, cage and rollers. The components are conically formed therefore offering ability to accommodate 1 direction axial and radial loads, while cage separates and holds the rollers. Diverse contact angles are offered in get to supply far better load or speed qualities. Throughout operation underneath standard conditions with bare minimum radial load ensured, bearing alone generates axial load from internal get in touch with angle of the bearing.
Positive aspects:
one.Large precision2.Low friction3.Wear resistan 4.Effortless substitution 5.Strong stock and Prompt shipping
Software:Tapered roller bearings are broadly employed in rolling mills, automobiles, machines, China Maker Deep Groove Ball Bearing 6201 For Motors plastic device, metallurgy, mining, and many others.

Item TitleFirst Japan TNT Taper Roller Bearing 4T- 46162/46368 with Size forty one.28*ninety three.sixty six*31.75mm
Design 4T- 46162/46368
QualityP0, P2, P4, P5, P6
MaterialGcr15, Gcr15SiMn, Chrome steel, ceramic, carbon steel, stainless steel
Good quality StandardISO 9001:2008
ApplicationAutomotive, ideal offering 6204 bearing for standard equipment tractor, machine instrument, electric device, drinking water pump, cranes, elevator, agricultural equipment, textile equipment, rolling mill, mining, metallurgical, plastic equipment ect.

Packaging & Transport
Our Solutions
one. 24 hours support is offered.
2. Make sure you truly feel totally free to get in touch with us if there any queries
3.OEM service:
1) Custom-made bearings are satisfactory according to your demands.
2) New style for bearing can be true in our manufacturing unit.
three) Best high quality bearings and much more affordable price tag.
four.Soon after-sale service:
1) All products will have been strictly Top quality Checked in property ahead of packing.
2) All items will be effectively packed just before shipping and delivery.
3) Our organization provices technical assiatance as the clients necessity and demands.
High qualityPassed the ISO9001:2008 quality method authentication and ROHS authentication.
Factory qualified supply1. We are company , Latest layout exceptional top quality multipoint supply slewing bearing with push give experienced merchandise with competitive price tag over ten many years.2. Experienced exported to a lot more than 40 countries globally.
Company Information
Speak to Information

The benefits of rubber bushings and how they work

If you have experienced increased vibration while driving, you know the importance of replacing the control arm bushings. The resulting metal-to-metal contact can cause annoying driving problems and be a threat to your safety. Over time, the control arm bushings begin to wear out, a process that can be exacerbated by harsh driving conditions and environmental factors. Additionally, larger tires that are more susceptible to bushing wear are also prone to increased vibration transfer, especially for vehicles with shorter sidewalls. Additionally, these plus-sized tires, which are designed to fit on larger rims, have a higher risk of transmitting vibrations through the bushings.


Rubber bushings are rubber tubes that are glued into the inner or outer curve of a cylindrical metal part. The rubber is made of polyurethane and is usually prestressed to avoid breaking during installation. In some cases, the material is also elastic, so it can slide. These properties make rubber bushings an integral part of a vehicle’s suspension system. Here are some benefits of rubber bushings and how they work.
Rubber bushings are used to isolate and reduce vibration caused by the movement of the two pieces of equipment. They are usually placed between two pieces of machinery, such as gears or balls. By preventing vibrations, rubber bushings improve machine function and service life. In addition to improving the overall performance of the machine, the rubber bushing reduces noise and protects the operator from injury. The rubber on the shock absorber also acts as a vibration isolator. It suppresses the energy produced when the two parts of the machine interact. They allow a small amount of movement but minimize vibration.
Both rubber and polyurethane bushings have their advantages and disadvantages. The former is the cheapest, but not as durable as polyurethane. Compared to polyurethane, rubber bushings are a better choice for daily commutes, especially long commutes. Polyurethane bushings provide better steering control and road feel than rubber, but can be more expensive than the former. So how do you choose between polyurethane and rubber bushings?


Unlike rubber, polyurethane bushings resist high stress environments and normal cycling. This makes them an excellent choice for performance builds. However, there are some disadvantages to using polyurethane bushings. Read on to learn about the advantages and disadvantages of polyurethane bushings in suspension applications. Also, see if a polyurethane bushing is suitable for your vehicle.
Choosing the right bushing for your needs depends entirely on your budget and application. Softer bushings have the lowest performance but may have the lowest NVH. Polyurethane bushings, on the other hand, may be more articulated, but less articulated. Depending on your needs, you can choose a combination of features and tradeoffs. While these are good options for everyday use, for racing and hardcore handling applications, a softer option may be a better choice.
The initial hardness of the polyurethane bushing is higher than that of the rubber bushing. The difference between the two materials is determined by durometer testing. Polyurethane has a higher hardness than rubber because it does not react to load in the same way. The harder the rubber, the less elastic, and the higher the tear. This makes it an excellent choice for bushings in a variety of applications.


Solid bushings replace the standard bushings on the subframe, eliminating axle clutter. New bushings raise the subframe by 0.59″ (15mm), correcting the roll center. Plus, they don’t create cabin noise. So you can install these bushings even when your vehicle is lowered. But you should consider some facts when installing solid casing. Read on to learn more about these casings.
The stiffest bushing material currently available is solid aluminum. This material hardly absorbs vibrations, but it is not recommended for everyday use. Its stiffness makes it ideal for rail vehicles. The aluminum housing is prone to wear and tear and may not be suitable for street use. However, the solid aluminum bushings provide the stiffest feel and chassis feedback. However, if you want the best performance in everyday driving, you should choose a polyurethane bushing. They have lower friction properties and eliminate binding.
Sturdy subframe bushings will provide more driver feedback. Additionally, it will strengthen the rear body, eliminating any movement caused by the subframe. You can see this structural integration on the M3 and M4 models. The benefits of solid subframe bushings are numerous. They will improve rear-end handling without compromising drivability. So if you plan to install a solid subframe bushing, be sure to choose a solid bushing.

Capacitor classification

In the circuit, there is a high electric field on both sides of the capacitor grading bushing. This is due to their capacitor cores. The dielectric properties of the primary insulating layer have a great influence on the electric field distribution within the bushing. This article discusses the advantages and disadvantages of capacitor grade bushings. This article discusses the advantages and disadvantages of grading bushings for capacitors in DC power systems.
One disadvantage of capacitor grading bushings is that they are not suitable for higher voltages. Capacitor grading bushings are prone to serious heating problems. This may reduce their long-term reliability. The main disadvantage of capacitor grading bushings is that they increase the radial thermal gradient of the main insulation. This can lead to dielectric breakdown.
Capacitor grading bushing adopts cylindrical structure, which can suppress the influence of temperature on electric field distribution. This reduces the coefficient of inhomogeneity of the electric field in the confinement layer. Capacitor grading bushings have a uniform electric field distribution across their primary insulation. Capacitive graded bushings are also more reliable than nonlinear bushings.
Electric field variation is the most important cause of failure. The electrode extension layer can be patterned to control the electric field to avoid flashover or partial discharge of the primary insulating material. This design can be incorporated into capacitor grading bushings to provide better electric fields in high voltage applications. This type of bushing is suitable for a wide range of applications. This article discusses the advantages and disadvantages of capacitor grade bushings.


When choosing between plastic and metal sleeves, it is important to choose a product that can handle the required load. Plastic bushings tend to deteriorate and often crack under heavy loads, reducing their mechanical strength and service life. Metal bushings, on the other hand, conduct heat more efficiently, preventing any damage to the mating surfaces. Plastic bushings can also be made with lubricating fillers added to a resin matrix.
Plastic bushings have many advantages over metal bushings, including being cheap and versatile. Plastic bushings are now used in many industries because they are inexpensive and quick to install. These plastic products are also self-lubricating and require less maintenance than metals. They are often used in applications where maintenance costs are high or parts are difficult to access. Also, if they are prone to wear and tear, they are easy to replace.
Metal bushings can be made of PTFE, plastic or bronze and are self-lubricating. Graphite plugs are also available for some metal bushings. Their high load capacity and excellent fatigue resistance make them a popular choice for automotive applications. The bi-metallic sintered bronze layer in these products provides excellent load-carrying capacity and good friction properties. The steel backing also helps reduce processing time and avoids the need for additional pre-lubrication.


A plastic bushing is a small ball of material that is screwed onto a nut or locknut on a mechanical assembly. Plastic bushings are very durable and have a low coefficient of friction, making them a better choice for durable parts. Since they do not require lubrication, they last longer and cost less than their metal counterparts. Unlike metal bushings, plastic bushings also don’t scratch or attract dirt.
One type of acetal sleeve is called SF-2. It is made of metal alloy, cold rolled steel and bronze spherical powder. A small amount of surface plastic penetrated into the voids of the copper spherical powder. Plastic bushings are available in a variety of colors, depending on the intended application. SF-2 is available in black or grey RAL 7040. Its d1 diameter is sufficient for most applications.
Another acetal sleeve is UHMW-PE. This material is used in the production of bearings and in low load applications. This material can withstand pressures from 500 to 800 PSI and is widely available. It is also self-lubricating and readily available. Due to its high resistance to temperature and chemical agents, it is an excellent choice for low-load industrial applications. If you’re in the market for an alternative to nylon, consider acetal.
Positional tolerances in many automotive components can cause misalignment. Misaligned plastic bushings can negatively impact the driver’s experience. For example, the cross tubes used to mount the seat to the frame are made by a stamping process. The result is a misalignment that can increase torque. Also, the plastic bushing is pushed to one side of the shaft. The increased pressure results in higher friction, which ultimately results in a poor driving experience.
China Original Japan TNT Taper Roller Bearing 4T- 4616246368 with Size 41.2893.6631.75mm     bearing driverChina Original Japan TNT Taper Roller Bearing 4T- 4616246368 with Size 41.2893.6631.75mm     bearing driver
editor by czh 2023-02-20