Professional

nylon sleeve bearing

Are there specific considerations for choosing nylon sleeve bearings in applications with high-speed or heavy load requirements?

Yes, there are specific considerations to keep in mind when choosing nylon sleeve bearings for applications with high-speed or heavy load requirements. Here’s a detailed explanation of these considerations:

High-Speed Applications:

When selecting nylon sleeve bearings for high-speed applications, several factors need to be considered:

Material Selection:

Choose a nylon material with low friction properties to minimize heat generation and reduce the risk of excessive wear at high speeds. Reinforced nylon or specialty formulations designed for high-speed applications are often preferred. These materials offer improved mechanical properties and can handle the demands of high-speed rotation while maintaining their structural integrity.

Lubrication:

Ensure that the nylon sleeve bearings are properly lubricated to reduce friction and dissipate heat. Consider self-lubricating nylon bearings that incorporate solid lubricants or additives within the material. These bearings provide continuous lubrication during operation, reducing the need for external lubrication and ensuring smooth performance at high speeds.

Cage Design:

Pay attention to the cage design of the nylon sleeve bearings. Opt for a cage design that promotes even distribution of the rolling elements and minimizes vibration and unwanted movement. A well-designed cage enhances stability and reduces the risk of issues caused by high-speed rotation, such as ball skidding or roller skewing.

Heavy Load Applications:

When considering nylon sleeve bearings for heavy load applications, the following factors should be taken into account:

Load Capacity:

Verify that the nylon sleeve bearings have the necessary load capacity to support the anticipated loads. Nylon bearings are available in different sizes and configurations, each with its own load-carrying capabilities. Consider the expected radial and axial loads and choose bearings that can withstand these forces without excessive deformation or premature failure.

Material Strength:

Select a nylon material with high mechanical strength and rigidity to handle heavy loads. Reinforced nylon or specialty formulations with enhanced strength properties are commonly used in heavy load applications. These materials provide the necessary structural integrity and resistance to deformation under significant loads.

Lubrication and Wear:

Ensure proper lubrication to reduce friction and wear between the bearing surfaces. Heavy loads can generate higher levels of heat and stress, increasing the risk of wear and premature failure. Consider self-lubricating nylon bearings or implement a lubrication regimen that adequately addresses the demands of the heavy load conditions.

It is important to note that while nylon sleeve bearings can handle high-speed or heavy load applications, there may be practical limits to their performance. In cases of extremely high speeds or exceptionally heavy loads, alternative bearing materials or designs, such as ball or roller bearings, may be more suitable.

In summary, when choosing nylon sleeve bearings for high-speed or heavy load applications, consider factors such as material selection, lubrication, cage design, load capacity, material strength, and wear prevention. By carefully evaluating these considerations, you can ensure that the nylon sleeve bearings meet the specific demands of the application, providing reliable performance and extended service life.

nylon sleeve bearing

What are the potential challenges or limitations of using nylon sleeve bearings in specific industries?

When considering the use of nylon sleeve bearings in specific industries, there are several potential challenges or limitations to be aware of. Here’s a detailed explanation of the challenges and limitations associated with using nylon sleeve bearings in specific industries:

High Load and Impact Applications:

Nylon sleeve bearings may have limitations when it comes to high load and impact applications. While nylon has good strength and load-bearing capabilities, it may not be suitable for extremely heavy loads or applications with frequent impacts. Excessive loads or impacts can cause deformation, accelerated wear, or even failure of the nylon material. In such cases, alternative bearing materials with higher load and impact resistance, such as bronze or steel, may be more appropriate.

Elevated Temperatures:

Nylon sleeve bearings have temperature limitations, particularly when it comes to elevated temperatures. Nylon begins to soften and lose its mechanical properties at higher temperatures. Prolonged exposure to temperatures above its recommended operating range can result in deformation, reduced load capacity, and compromised performance of the bearings. In industries where high temperatures are common, such as automotive or industrial applications, alternative bearing materials capable of withstanding higher temperatures, such as specialized polymers or self-lubricating metals, may be more suitable.

Chemical Exposure:

While nylon sleeve bearings offer good resistance to certain chemicals, they may not be suitable for all types of chemical exposures. Nylon can be adversely affected by strong acids, strong bases, and certain solvents. In industries where extensive exposure to corrosive or chemically aggressive environments is expected, alternative bearing materials specifically designed for chemical resistance, such as PTFE (polytetrafluoroethylene) or stainless steel, may be more appropriate.

Hydrolysis:

Nylon is susceptible to hydrolysis, a chemical reaction that occurs when nylon comes into contact with water or high humidity over extended periods. Hydrolysis can lead to a decrease in mechanical properties, dimensional changes, and overall degradation of the nylon material. In industries where prolonged exposure to moisture or high humidity is expected, alternative bearing materials with better resistance to hydrolysis, such as acetal or PEEK (polyether ether ketone), may be more suitable.

Speed Limitations:

Nylon sleeve bearings have speed limitations due to factors such as heat generation and potential for material deformation at higher speeds. In high-speed applications, the centrifugal forces and generated heat can cause the nylon material to soften or warp, leading to reduced bearing performance and potential failure. If high-speed operation is a requirement, alternative bearing materials designed for high-speed applications, such as specialized self-lubricating metals or ceramic hybrids, may be more suitable.

In summary, while nylon sleeve bearings offer numerous advantages, they also have potential challenges and limitations in specific industries. Factors such as high loads, impacts, elevated temperatures, chemical exposure, hydrolysis, and speed limitations can affect the performance and suitability of nylon bearings. It is important to carefully assess the application requirements, operating conditions, and potential limitations of nylon sleeve bearings and consider alternative bearing materials when necessary to ensure optimal performance and longevity in specific industries.

nylon sleeve bearing

What are the key applications and industries where nylon sleeve bearings are commonly used?

Nylon sleeve bearings find widespread use in various applications and industries due to their unique properties and advantages. Here’s a detailed overview of the key applications and industries where nylon sleeve bearings are commonly used:

Automotive Industry:

In the automotive industry, nylon sleeve bearings are utilized in various components and systems. They can be found in applications such as door hinges, window regulators, seat mechanisms, steering columns, throttle linkages, and windshield wiper systems. Nylon bearings’ low friction, self-lubricating properties, corrosion resistance, and durability make them suitable for these demanding automotive applications.

Industrial Machinery:

Nylon sleeve bearings are widely employed in industrial machinery across different sectors. They are commonly used in conveyor systems, packaging equipment, printing presses, textile machinery, food processing machinery, and material handling equipment. Nylon bearings’ low friction characteristics, wear resistance, and ability to operate in various environmental conditions make them suitable for these applications.

Electrical and Electronics:

The electrical and electronics industry utilizes nylon sleeve bearings in various applications. They are often used in fans, motors, pumps, actuators, switches, relays, and other components. Nylon bearings’ self-lubricating properties, lightweight construction, and resistance to corrosion and chemicals make them suitable for electrical and electronic applications where reliable and efficient operation is essential.

Medical and Healthcare:

Nylon sleeve bearings find applications in the medical and healthcare industry, particularly in devices and equipment that require smooth and quiet operation. They are used in hospital beds, patient lifts, dental chairs, diagnostic equipment, and laboratory instruments. Nylon bearings’ low friction, noise reduction capabilities, and resistance to sterilization processes make them suitable for these critical healthcare applications.

Agricultural Machinery:

In the agricultural sector, nylon sleeve bearings are commonly found in farm machinery and equipment. They are used in applications such as tractors, harvesters, sprayers, irrigation systems, and feeders. Nylon bearings’ resistance to moisture, corrosion, and wear, coupled with their ability to operate in dusty or dirty environments, makes them suitable for agricultural machinery.

Food and Beverage:

Nylon sleeve bearings play a crucial role in the food and beverage industry, where hygiene and cleanliness are paramount. They are used in food processing equipment, bottling machines, conveyors, mixers, and packaging machinery. Nylon bearings’ corrosion resistance, self-lubrication properties, and compliance with food safety standards make them suitable for these food and beverage applications.

Marine and Water Applications:

Due to their excellent resistance to corrosion and moisture, nylon sleeve bearings are commonly used in marine and water-related applications. They find use in boat trailers, marine pumps, water treatment equipment, underwater cameras, and marine engine components. Nylon bearings’ ability to withstand exposure to saltwater and other harsh environmental conditions makes them ideal for marine and water applications.

Recreational and Sports Equipment:

Nylon sleeve bearings are utilized in a wide range of recreational and sports equipment. They can be found in bicycles, skateboards, fitness equipment, fishing reels, rollerblades, and various other gear and mechanisms. Nylon bearings’ low friction, durability, and ability to handle dynamic loads make them suitable for these recreational and sports applications.

In summary, nylon sleeve bearings are commonly used in a diverse range of applications and industries. They find extensive use in the automotive industry, industrial machinery, electrical and electronics, medical and healthcare, agricultural machinery, food and beverage, marine and water applications, as well as recreational and sports equipment. Nylon bearings’ unique properties make them a versatile choice for various applications where low friction, self-lubrication, wear resistance, and corrosion resistance are required.

Professional
editor by CX 2024-04-17

China manufacturer 2217K 2218K 2219K 2220K 2221K 2222K Self-Aligning Ball Bearing with Adapter Sleeve for Machinery Using with Best Sales

Product Description

Self-aligning ball bearings are double row, self-retaining units comprising solid outer rings with a concave raceway, inner rings with a cylindrical or tapered bore and ball and cage assemblies. The bearings are available in open and sealed versions.

Constructed with the inner ring and ball assembly contained within an outer ring which has a spherical raceway for self aligning this type of bearing is particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.

Dimensions(mm)			Basic Load Rating(N)		Weight
Bearing Number	d	D	B	Dyn.C	Stat.C0	kg
1200	10	30	9	5480	1200	0.034
1201	12	32	10	5550	1250	0.04
1202	15	35	11	7480	1750	0.049
1203	17	40	12	7900	2571	0.073
1204	20	47	14	9950	2650	0.116
1205	25	52	15	12000	3300	0.14
1206	30	62	16	15800	4700	0.22
1207	35	72	17	15800	5080	0.32
1208	40	80	18	19200	6400	0.415
1209	45	85	19	21800	7320	0.465
1210	50	90	20	22800	8080	0.531
1211	55	100	21	26800	10000	0.705
1212	60	110	22	35710	11500	0.9
1213	65	120	23	31000	12500	1.15
1214	70	125	24	34500	13500	1.24
1215	75	130	25	38800	15200	1.39
1216	80	140	26	39500	16800	1.7
1217	85	150	28	48800	20500	2.06
1218	90	160	30	56500	23200	2.59
1219	95	170	32	63500	27000	3.1
1220	100	180	34	67400	28400	3.7
1224	120	215	42	117000	51000	6.77
1300	10	35	11	7220	1620	0.058
1301	12	37	12	9420	2120	0.067
1302	15	42	13	9500	2280	0.094
1303	17	47	14	12500	3180	0.13
1304	20	52	15	12500	3380	0.165
1305	25	62	17	17800	5050	0.255
1306	30	72	19	21500	6280	0.385
1307	35	80	21	25000	7950	0.51
1308	40	90	23	29500	9500	0.715
1309	45	100	25	38000	12800	0.955
1310	50	110	27	43200	14200	1.2
1311	55	120	29	51500	18200	1.6
1312	60	130	31	57200	21200	1.95
1313	65	140	33	61800	22800	2.42
1314	70	150	35	74500	27500	3
1315	75	160	37	79000	29800	3.55
1316	80	170	39	86700	31400	4.17
1317	85	180	41	97800	37800	5
1318	90	190	43	115000	42000	5.8
1318	90	190	43	115000	42000	5.8
1319	95	200	45	132000	50800	6.7
1320	100	215	47	141000	55000	8.3
1322	110	240	50	161000	70000	12
2200	10	30	14	8000	1800	0.048
2201	12	32	14	8400	1900	0.052
2202	15	35	14	8600	2000	0.056
2203	17	40	16	10400	2500	0.087
2204	20	47	18	16400	4100	0.13
2205	25	52	18	15200	3900	0.16
2206	30	62	20	15200	4600	0.26
2207	35	72	23	21800	6650	0.405
2208	40	80	23	22500	7380	0.505
2209	45	85	23	23200	8000	0.54
2210	50	90	23	23200	8450	0.58
2211	55	100	25	26800	9950	0.8
2212	60	110	28	34000	12500	1.09
2213	65	120	31	43500	16200	1.45
2214	70	125	31	44000	17000	1.5
2215	75	130	31	44200	18000	1.6
2216	80	140	33	48800	25710	2.15
2217	85	150	36	58200	23500	2.67
2218	90	160	40	70000	28500	3.37
2220	100	180	46	97200	40500	4.94
2300	10	35	17	10000	2100	0.08
2301	12	37	17	11400	2600	0.091
2302	15	42	17	11800	2800	0.108
2303	17	47	19	14300	3500	0.168
2304	20	52	21	17800	4750	0.21
2305	25	62	24	24500	6480	0.335
2306	30	72	27	31500	8680	0.5
2307	35	80	31	39200	11000	0.675
2308	40	90	33	44800	13200	0.925
2309	45	100	36	55000	16200	1.23
2310	50	110	40	64500	19800	1.63
2311	55	120	43	75200	23500	2.09
2312	60	130	46	86800	27500	2.6
2313	65	140	48	96000	32500	3.2
2314	70	150	51	110000	37500	3.92
2315	75	160	55	122000	42800	4.78
2316	80	170	58	128000	45500	5.65

Features of self-aligning ball bearings:

APPLICATION

Applied in heavy loading and impact loading, such as precision instruments, low noise machine, automobile, motorcycle, metallurgy, rolling mill, mine, petroleum, paper making, cement, the sugar industry and etc. Self-Aligning Ball Bearings are used for commercial ground shafting applications.

Packaging & Shipping

Please contact us for more pictures of different packing.

Universal Packing	Without any logo on bearings or packing.
JDZ Packing	With our brand JDZ on bearings and packing.
Customized Packing	Depends on buyer’s requirements.
Original Brand Packing	Bearing and packing are both original. Please contact us for pictures.

QUALITY ASSURANCE

100% Quality inspection to ensure the bearings are with good quality before shipping.

Company Profile

ZheJiang CZPT Precision Bearing Co.,Ltd. was founded by ZheJiang Defa Bearing Co.,Ltd, factory is located in ZheJiang province, China.
We are a bearing manufacturer integrating the research, development and sales of bearings, with a floor area of 18,000 square meters and a plant area of 8,800 square meters. Equipped with modern production equipment and advanced detection instruments.

We can provide all types bearings and OEM service according to customers’ requirements.

Our products are widely used in the automobile, agricultural, textile production, mining, printing and packing industries, in addition to various applications at airports, in air-conditioning systems, conveying devices, ships ad so on. Our products are being exported to more than 50 countries and regions overseas including Singapore, Thailand, Iran, Turkey, Poland, Italy, England, France, Russia, Germany, the United States, Australia, Argentina, Brazil as well as other countries and regions all over the world.

We are a trusted and reliable bearing supplier, choose us to be your good partner!

Our Advantages:

1. Professional production team with advanced production equipment and testing instruments.
2. Many years of export experience can provide customers with better service and problem-solving capabilities.
3. Customers all over the world enable us to better understand the market and provide customers with suitable bearings.
4. Sincerity, cooperation, mutual and provide good quality bearings for clients are the development idea of our company.
5. Quick delivery, shipping goods on time. Save more time and cost for all customers.

More choices

RFQ:

1. Q: Are you trading company or manufacturer ?
A: We have our own factory , our type is factory + trade.

2. Q: Could you accept OEM and customize?
A: Yes, we can customize products according to your sample or drawing.

3. Q: How long is your delivery time?
A: If stock, within 7 days to ship or based on your order quantity.

4. Q: Could you supply sample for free?
A: Yes, we can offer the sample for free,do you mind to buy a “ticket” for her?

More details, please contact with us. Thanks for your time!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bearing Type:	Self-Aligning Ball Bearing
Number of Row:	Double Row
Hardness:	58-62 HRC
Chamfer:	Light Chamfer or Black Chamfer
Precision Rating:	P0 P6 P5 P4 P2
Bearing Cage:	Nylon / Steel / Brass Cage

Samples:	US$ 1/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

nylon sleeve bearing

Can you provide guidance on the selection and sizing of nylon sleeve bearings for specific applications?

Yes, I can provide guidance on the selection and sizing of nylon sleeve bearings for specific applications. Here’s a detailed explanation of the factors to consider when selecting and sizing nylon sleeve bearings:

Load and Application Requirements:

The first step in selecting nylon sleeve bearings is to assess the load and application requirements. Determine the maximum load the bearing will experience, including static and dynamic loads. Consider factors such as rotational speed, operating temperature, environmental conditions, and the presence of contaminants or chemicals. Understanding the specific application requirements will help in selecting a nylon bearing with the appropriate load capacity, temperature resistance, chemical compatibility, and other necessary properties.

Bearing Dimensions:

Next, consider the dimensions of the bearing. Measure the shaft diameter and the housing bore to determine the appropriate bearing size. Nylon sleeve bearings are available in a range of standard sizes, so select a bearing that matches the dimensions of the shaft and housing for a proper fit. Ensure that there is sufficient clearance between the shaft and the bearing to allow for proper lubrication and thermal expansion.

Lubrication Requirements:

Consider the lubrication requirements of the application. Nylon sleeve bearings can be self-lubricating, which means they have built-in lubrication properties. Assess whether the application conditions allow for proper self-lubrication or if additional lubrication is necessary. Factors such as operating speed, temperature, and the presence of contaminants may influence the lubrication requirements. If external lubrication is needed, ensure that the chosen nylon bearing is compatible with the lubricant used.

Environmental Factors:

Take into account the environmental factors that the nylon sleeve bearings will be exposed to. Consider temperature variations, humidity levels, exposure to chemicals or corrosive substances, and the presence of abrasive particles. If the application involves extreme temperatures, exposure to chemicals, or other harsh conditions, select a nylon bearing with appropriate material properties and resistance to those environmental factors.

Industry Standards and Regulations:

Check if there are any industry-specific standards or regulations that need to be followed when selecting nylon sleeve bearings. Certain industries, such as automotive or aerospace, may have specific requirements for bearing materials, performance standards, or certifications. Ensure that the chosen nylon bearing complies with the relevant standards and regulations to meet the specific industry requirements.

Consult Manufacturer or Supplier:

Lastly, it is recommended to consult the manufacturer or supplier of nylon sleeve bearings for additional guidance. They can provide expertise and assistance in selecting the most suitable bearing for the specific application. The manufacturer or supplier can offer information on material properties, load capacities, temperature limits, and other technical specifications to ensure the optimal selection and sizing of nylon sleeve bearings.

By considering these factors and consulting with experts, you can make an informed decision when selecting and sizing nylon sleeve bearings for specific applications. Taking the time to choose the right bearing will contribute to the performance, longevity, and reliability of the equipment or machinery in which they are used.

nylon sleeve bearing

Can you provide examples of machinery or equipment that frequently use nylon sleeve bearings?

Several types of machinery and equipment frequently utilize nylon sleeve bearings due to their advantageous properties and suitability for specific applications. Here are some examples of machinery and equipment where nylon sleeve bearings are commonly employed:

Electric Motors: Nylon sleeve bearings are often found in electric motors, where they provide support and reduce friction between rotating components such as shafts and bushings. The self-lubricating property of nylon helps ensure smooth operation and longevity of the motor.
Home Appliances: Many home appliances utilize nylon sleeve bearings to facilitate smooth and quiet operation. Examples include washing machines, dryers, dishwashers, vacuum cleaners, and fans. Nylon bearings help reduce noise, minimize friction, and enhance the overall performance of these appliances.
Automotive Applications: Nylon sleeve bearings are commonly used in various automotive applications. They can be found in windshield wiper mechanisms, window regulators, seat adjusters, door hinges, and throttle linkages. Nylon bearings offer low friction, durability, and resistance to moisture and corrosion, making them suitable for automotive environments.
Conveyor Systems: Nylon sleeve bearings are utilized in conveyor systems, where they support the movement of conveyor belts or rollers. They help reduce friction, facilitate smooth and efficient material handling, and contribute to the overall reliability of the conveyor system.
Fitness Equipment: Many types of fitness equipment, such as treadmills, elliptical trainers, and stationary bikes, incorporate nylon sleeve bearings. These bearings support the rotation of pedal cranks, flywheels, and other moving parts, ensuring smooth and quiet operation during exercise routines.
Office Equipment: Nylon sleeve bearings are commonly used in office equipment like printers, copiers, scanners, and shredders. They help reduce friction in moving components, such as paper feed mechanisms and scanning assemblies, resulting in smoother operation and improved reliability.
Industrial Machinery: Nylon sleeve bearings find applications in various industrial machinery, such as pumps, compressors, blowers, and machine tools. They provide support, reduce friction, and contribute to the overall efficiency and performance of these machines.
Medical Devices: Nylon sleeve bearings are used in medical devices and equipment, including surgical instruments, laboratory equipment, imaging systems, and patient beds. Their self-lubricating property, low friction, and resistance to chemicals make them suitable for medical environments.

These examples demonstrate the versatility and wide-ranging applications of nylon sleeve bearings in various industries. The specific design and material composition of nylon bearings may vary depending on the requirements and operating conditions of each application.

In summary, nylon sleeve bearings are commonly found in electric motors, home appliances, automotive applications, conveyor systems, fitness equipment, office equipment, industrial machinery, and medical devices. Their use in these applications helps reduce friction, ensure smooth operation, enhance durability, and improve overall performance.

nylon sleeve bearing

What are nylon sleeve bearings, and how are they used in machinery and equipment?

Nylon sleeve bearings, also known as plain bearings or bushings, are a type of bearing made from nylon material. They are used in machinery and equipment for various applications that require low friction, noise reduction, and resistance to wear and corrosion. Here’s a detailed explanation of nylon sleeve bearings and their uses in machinery and equipment:

Construction and Material:

Nylon sleeve bearings are typically made from a type of nylon known as polyamide. Polyamide is a synthetic polymer that offers several desirable properties for bearing applications. It has excellent self-lubricating properties, low friction coefficient, good resistance to wear and abrasion, and high resistance to chemicals and corrosion. Nylon is also known for its lightweight and cost-effectiveness, making it a popular choice for various industrial applications.

Low-Friction Operation:

Nylon sleeve bearings provide a low-friction operation due to the self-lubricating properties of nylon. The material has inherent lubricity, which reduces friction and heat generation during operation. This low-friction characteristic helps minimize energy losses, enhance efficiency, and reduce the wear of mating surfaces. It also contributes to quieter operation, making nylon sleeve bearings suitable for applications where noise reduction is important.

Wear and Corrosion Resistance:

Nylon sleeve bearings exhibit good resistance to wear and corrosion. The nylon material is capable of withstanding continuous sliding motion against other surfaces without significant wear or damage. It can handle both radial and axial loads while maintaining its integrity. Additionally, nylon has high resistance to chemicals, moisture, and most common lubricants, making it suitable for applications in harsh or corrosive environments.

Versatility and Design Flexibility:

Nylon sleeve bearings offer versatility and design flexibility due to their ease of manufacturing and customization. They can be produced in various shapes and sizes, including cylindrical, flanged, or thrust configurations, to accommodate different application requirements. Nylon’s moldability allows for complex geometries and intricate features, enabling engineers to design bearings with specific load-carrying capacities and dimensional tolerances.

Applications in Machinery and Equipment:

Nylon sleeve bearings find applications in a wide range of machinery and equipment across various industries. Some common uses include:

Automotive Industry: Nylon sleeve bearings are used in automotive components such as suspension systems, steering columns, and throttle linkages. They provide smooth and reliable operation while withstanding the demanding conditions of the automotive environment.
Industrial Machinery: Nylon sleeve bearings are employed in industrial machinery, including conveyor systems, pumps, fans, and electric motors. They help reduce friction, absorb shocks and vibrations, and provide long-lasting performance under heavy loads.
Home Appliances: Nylon sleeve bearings are utilized in various home appliances such as washing machines, dishwashers, and refrigerators. They contribute to quiet operation, durability, and smooth movement of rotating components.
Office Equipment: Nylon sleeve bearings can be found in office equipment like printers, scanners, and copiers. They ensure smooth and reliable movement of paper feed mechanisms, rollers, and other moving parts.
Sports Equipment: Nylon sleeve bearings are used in sports equipment, including bicycles, skateboards, and fitness machines. They provide low-friction performance, durability, and resistance to moisture and corrosion.

In summary, nylon sleeve bearings are bearings made from nylon material, offering low friction, wear resistance, corrosion resistance, and design flexibility. They find applications in various machinery and equipment across industries, providing reliable and efficient operation. Nylon sleeve bearings are valued for their self-lubricating properties, low noise characteristics, and ability to withstand diverse operating conditions, making them a popular choice for many engineering applications.

China manufacturer 2217K 2218K 2219K 2220K 2221K 2222K Self-Aligning Ball Bearing with Adapter Sleeve for Machinery Using with Best Sales
editor by CX 2024-04-17

China Best Sales Active-Power Industries Sleeve Bearing China Factory 51252/51256 Thrust Ball Bearing 58208 bearing block

Product Description

ACTIVE-POWER INDUSTRIES Sleeve Bearing China Factory 51252/51256 Thrust Ball Bearing 58208

Product Description

Thrust ball bearings are designed to withstand thrust loads during high-speed operation and consist of washer-shaped rings with raceway grooves for ball rolling. Because the ferrule is cushion-shaped, thrust ball bearings are divided into 2 types: flat base cushion type and self-aligning spherical cushion type. In addition, this kind of bearing can bear axial load, but cannot bear radial load.

Composition of thrust ball bearings: Thrust ball bearings are composed of 3 parts: seat ring, shaft ring, and steel ball cage assembly. The shaft ring matched with the shaft is called the seat ring matched with the shell.

Thrust ball bearing Type:
According to the force situation, it can be divided into one-way thrust ball bearing and two-way thrust ball bearing. One-way thrust ball bearings can bear a one-way axial load. Two-way thrust ball bearings can withstand two-way axial loads, in which the shaft ring is matched with the shaft. The mounting surface of the seat ring is a spherical bearing, which has self-aligning performance and can reduce the influence of installation errors. Thrust ball bearings cannot bear radial loads, and the limit speed is low.

Thrust ball bearing Features:

1. There are 2 types of one-way and two-way
2. In order to allow installation errors, whether it is one-way or two-way, you can choose the spherical self-aligning spherical seat cushion type or the spherical seat ring type.
3. High-quality steel – using ultra-clean steel that can extend bearing life by up to 80%
4. Advanced grease technology ― lubricant technology can extend the life of grease and improve the performance of bearings
5. High-grade steel balls – quiet and smooth when rotating at high speed
6. With the ferrule in the option, installation errors can be tolerated.

Product Parameters

Product Name	Thrust Ball Bearing
Type	Thrust Bearing
Structure	Ball structure / Roller structure
Applicable Industries	Machinery repair shop, automobile, agricultural machinery, mechanical equipment
Size	5mm-500mm
Accuracy Grade	P0, P6, P5, P4
Origin	ZheJiang , China
Material	GCr15
Retainer Material	Copper/Steel/Nylon
Service	OEM / ODM
Certificate	ISO9001:2008

Thrust Bearing
51100	51200	51304	51405
51101	51201	51305	51406
51102	51202	51306	51407
51103	51203	51307	51408
51104	51204	51308	51409
51105	51205	51309	51410
51106	51206	51310	51411
51107	51207	51311	51412
51108	51208	51312	51413
51109	51209	51313	51414
51110	51210	51314	51415
51111	51211	51315	51416
51112	51212	51316	51417
51113	51213	51317	51418
51114	51214	51318	51419
51115	51215	51320	51420
51116	51216	51322	51422
51117	51217	51324	51424
51118	51218	51326	51426
51120	51220	51328	958705
51122	51222	51330
51124	51224	51332	81126
51126	51226	51334	81128
51128	51228	51336	81130
51130	51230		81134
51132	51232		81205
51134	51234		81206
51136	51236		81207
51138	51238		81208
51140	51240		81209
51144	51244		81210
	51248		81211
	51252		81212
	51256		81213
			81214
			81215
			81216
			81217
			81218
			81220
			81222

Company Profile

HangZhou Active-Power Industrial. is located in HangZhou, ZheJiang , China. The factory has been committed to the production research and development of bearings for more than 20 years. We support OEM and ODM bearing customization.

The main products are: Deep Groove Ball Bearing Taper Roller Bearing Tapered Roller Bearing Auto Wheel Hub Bearing Cylindrical Roller Bearing Spherical Roller Bearing Motor Bearing Needle Roller Bearing Angular Contact Ball Bearing.

FAQ

Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;

2>.Help customers with bearing choice, clearance configuration, product” life, and reliability analysis;

3>. Offer highly cost-effective and complete solution program according to site conditions;

4>. Offer localized program on introduced equipment to save running cost

Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;

2>.Help customers with trouble diagnosis and failure analysis;

3>. Visit customers regularly and feedback on their rational suggestions and requirements to the company.

Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.

2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings of world-class quality.

3>.OEM or Non-Stand Bearings:
Any requirement for Non-standard roller bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.

4>.Genuine products With Excellent Quality:
The company has always proved the 100% quality products it provides with genuine intent.

5>. After-Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.

6>.Quick Delivery:
The company provides just-in-time delivery with its streamlined supply chain.

7>.Cost Saving:
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.

Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at the first time, and we will immediately process

Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem

Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name:	Auto Bearing
Keywords:	Thrust Ball Bearing
Bearing Material:	Copper / Steel / Nylon
Precision Rating:	P0 P5 P6
Bearing Clearance:	C0 C3 C4 C5
Bore Size:	5mm-500mm

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

nylon sleeve bearing

How do nylon sleeve bearings contribute to the reduced maintenance and extended service life of equipment?

Nylon sleeve bearings play a significant role in reducing maintenance requirements and extending the service life of equipment. Here’s a detailed explanation of how nylon sleeve bearings contribute to these benefits:

Self-Lubricating Properties:

Nylon sleeve bearings are often designed with self-lubricating properties. They incorporate solid lubricants or additives within the nylon material, which provide a continuous and adequate supply of lubrication during operation. This eliminates or reduces the need for external lubrication, such as oil or grease, and minimizes the maintenance tasks associated with lubrication. The self-lubricating properties of nylon bearings ensure smooth operation and reduce the risk of bearing failure due to insufficient or improper lubrication.

Low Friction and Wear:

Nylon sleeve bearings offer low friction characteristics, resulting in reduced wear on both the bearing and the mating components. The low friction properties contribute to lower energy consumption, as less force is required to overcome frictional resistance. This reduces the wear and tear on the bearing surfaces, prolonging the service life of the equipment. The low friction and wear characteristics of nylon bearings result in decreased maintenance needs, fewer replacements, and extended operational longevity.

Corrosion and Chemical Resistance:

Nylon sleeve bearings exhibit excellent corrosion and chemical resistance compared to many other bearing materials. They are resistant to various chemicals, solvents, and corrosive substances typically encountered in industrial environments. This resistance protects the bearing surfaces from degradation and corrosion, reducing the risk of premature failure. The ability of nylon bearings to withstand corrosive conditions contributes to extended service life and minimizes the maintenance required to address corrosion-related issues.

High Load Capacity:

Nylon sleeve bearings have a high load capacity relative to their size and weight. They are engineered to withstand substantial radial and axial loads, making them suitable for a wide range of applications. The high load capacity of nylon bearings allows for the distribution of forces and minimizes stress concentrations, reducing the likelihood of bearing failure. By effectively handling high loads, nylon bearings contribute to extended service life and reduced maintenance needs.

Resistance to Contaminants:

Nylon sleeve bearings are designed to resist the intrusion of contaminants such as dirt, dust, and debris. They have a self-cleaning action that helps prevent the buildup of particles between the bearing surfaces. This resistance to contaminants minimizes the risk of abrasive wear and damage to the bearing, ensuring smooth and reliable operation over an extended period. The ability of nylon bearings to resist contaminants reduces maintenance requirements and enhances the service life of equipment.

In summary, nylon sleeve bearings contribute to reduced maintenance and extended service life of equipment through their self-lubricating properties, low friction and wear characteristics, corrosion and chemical resistance, high load capacity, and resistance to contaminants. By incorporating nylon bearings into equipment design, manufacturers can benefit from lower maintenance costs, longer operational life, and improved reliability, ultimately leading to increased productivity and reduced downtime.

nylon sleeve bearing

Can nylon sleeve bearings be customized or machined for unique industrial needs?

Yes, nylon sleeve bearings can be customized or machined to meet unique industrial needs. Here’s a detailed explanation of the customization and machining possibilities for nylon sleeve bearings:

Custom Sizes and Dimensions:

Nylon sleeve bearings can be customized to specific sizes and dimensions to fit unique industrial applications. Manufacturers can produce nylon bearings in various diameters, lengths, and wall thicknesses to meet specific requirements. This customization allows for a precise fit within existing equipment or designs, ensuring optimal performance and functionality.

Specialized Formulations:

Nylon is available in different formulations with varying properties to suit specific industrial needs. Manufacturers can modify the composition of the nylon material by adding fillers, reinforcements, or additives to enhance certain characteristics. For example, glass fiber reinforcement can be incorporated to improve the bearing’s strength and load-bearing capacity. By customizing the formulation, nylon sleeve bearings can be tailored to withstand unique operating conditions, such as extreme temperatures, chemicals, or wear requirements.

Lubrication Modifications:

The lubrication properties of nylon sleeve bearings can also be customized to meet specific industrial needs. Manufacturers can incorporate different types of solid lubricants or additives into the nylon material to enhance its self-lubricating capabilities. This customization can reduce friction, improve wear resistance, and extend the bearing’s lifespan in applications where external lubrication may be challenging or undesirable.

Machining and Secondary Operations:

Nylon sleeve bearings can undergo machining and secondary operations to achieve precise dimensions, tolerances, or specific features. Machining processes such as turning, milling, or drilling can be employed to create complex shapes, grooves, or flanges in the bearing. Secondary operations like grinding, polishing, or heat treatments can further refine the bearing’s surface finish, hardness, or dimensional stability. These machining and secondary operations enable the customization of nylon bearings to meet unique industrial needs and integration requirements.

Additional Features or Coatings:

Depending on the specific industrial needs, nylon sleeve bearings can be customized with additional features or coatings. For example, manufacturers can incorporate special grooves, seals, or flanges to enhance sealing capabilities or improve the bearing’s retention within the housing. Coatings such as Teflon or PTFE can be applied to reduce friction, enhance wear resistance, or provide additional chemical resistance. These additional features and coatings can be tailored to address specific challenges or requirements in various industries.

In summary, nylon sleeve bearings can be customized and machined to meet unique industrial needs. Customization options include producing bearings in custom sizes and dimensions, formulating the nylon material for specific properties, modifying lubrication characteristics, and incorporating additional features or coatings. Machining and secondary operations enable precise shaping, refining dimensions, and adding specific features to the bearings. By leveraging these customization and machining possibilities, nylon sleeve bearings can be tailored to address the specific challenges and requirements of diverse industrial applications.

nylon sleeve bearing

How do nylon sleeve bearings compare to other types of sleeve bearings, such as bronze?

When comparing nylon sleeve bearings to other types of sleeve bearings, such as bronze, there are several factors to consider. Here’s a detailed comparison between nylon sleeve bearings and bronze sleeve bearings:

Friction and Lubrication:

Nylon sleeve bearings have inherent low-friction properties, which reduce the need for additional lubrication. They offer self-lubrication capabilities, allowing them to operate with minimal or no external lubrication. On the other hand, bronze sleeve bearings typically require regular lubrication to minimize friction and wear. Lubrication is necessary to create a lubricating film between the bearing and the mating surface, reducing friction and preventing metal-to-metal contact.

Wear Resistance:

Both nylon and bronze sleeve bearings offer good wear resistance. Nylon bearings can withstand continuous sliding motion against mating surfaces without significant wear or damage. Bronze bearings, especially those made from materials like phosphor bronze or aluminum bronze, are also known for their excellent wear resistance. However, the specific wear characteristics may depend on the application requirements, load conditions, and environmental factors.

Corrosion Resistance:

In terms of corrosion resistance, nylon sleeve bearings have an advantage over bronze bearings. Nylon is highly resistant to corrosion and does not rust or corrode when exposed to moisture or most common chemicals. Bronze bearings, although generally resistant to corrosion, can be susceptible to oxidation or chemical attack in certain environments. Bronze bearings may require additional protective coatings or maintenance to prevent corrosion-related issues.

Load Capacity:

Bronze sleeve bearings typically have higher load-carrying capacities compared to nylon sleeve bearings. Bronze, being a metal alloy, offers greater strength and hardness, allowing it to withstand heavier loads and higher pressures. Bronze bearings are commonly used in applications that involve significant loads or impact forces. Nylon bearings, while suitable for many moderate-load applications, may not be as appropriate for extremely heavy load conditions.

Temperature Range:

Bronze bearings generally have a wider temperature range compared to nylon bearings. Bronze can withstand higher temperatures without significant loss of mechanical properties. It is commonly used in high-temperature applications where nylon may not be suitable due to its lower melting point. Nylon sleeve bearings have a temperature limit, beyond which the material can deform or degrade. They are typically used in applications with lower temperature requirements.

Noise and Vibration:

Nylon sleeve bearings offer inherent noise reduction capabilities due to their low-friction operation. They can help dampen vibrations and reduce noise levels, contributing to quieter machinery and equipment. Bronze bearings, depending on their design and lubrication, can generate more noise and vibrations during operation. Additional measures, such as proper lubrication and vibration dampening arrangements, may be required to minimize noise and vibration in bronze bearing applications.

Cost:

In terms of cost, nylon sleeve bearings are generally more cost-effective compared to bronze bearings. Nylon is a readily available and cost-efficient material, making the manufacturing of nylon bearings economical. Bronze bearings, especially those made from high-performance alloys, can be more expensive due to the cost of raw materials and the manufacturing process. The cost difference may vary depending on the specific application requirements and the availability of materials.

In summary, nylon sleeve bearings and bronze sleeve bearings have distinct characteristics and advantages. Nylon bearings offer low friction and self-lubrication properties, corrosion resistance, and cost-effectiveness. They are suitable for moderate-load applications and environments where corrosion is a concern. Bronze bearings provide higher load capacities, wider temperature ranges, and are commonly used in heavy-load applications. The choice between nylon and bronze depends on the specific application requirements, load conditions, temperature range, and other factors.

China Best Sales Active-Power Industries Sleeve Bearing China Factory 51252/51256 Thrust Ball Bearing 58208 bearing block
editor by CX 2024-04-16

Standard

nylon sleeve bearing

How do innovations and advancements in nylon sleeve bearing technology impact their use?

The constant innovations and advancements in nylon sleeve bearing technology have a significant impact on their use. Here’s a detailed explanation of how these advancements influence the application and performance of nylon sleeve bearings:

Improved Performance:

Innovations and advancements in nylon sleeve bearing technology often lead to improved performance characteristics. Manufacturers continually develop new formulations, additives, and processing techniques to enhance the strength, load capacity, wear resistance, and overall performance of nylon bearings. These improvements enable nylon sleeve bearings to withstand higher loads, operate at elevated temperatures, resist chemicals, and exhibit better dimensional stability, resulting in enhanced performance and reliability in various applications.

Expanded Application Range:

Advancements in nylon sleeve bearing technology have expanded their application range. With improved performance capabilities, nylon bearings can now be used in a wider range of industries and applications. They are increasingly employed in automotive, aerospace, machinery, electronics, and many other sectors where low-friction, self-lubricating, and lightweight bearing solutions are desired. The expanded application range allows nylon sleeve bearings to replace traditional bearing materials in diverse environments and contribute to more efficient and cost-effective designs.

Specialized Solutions:

Innovations in nylon sleeve bearing technology have resulted in the development of specialized solutions for specific industries or challenging applications. Manufacturers have introduced nylon bearings with tailor-made properties to address unique requirements. For example, there are nylon sleeve bearings specifically engineered for high-speed applications, extreme temperatures, corrosive environments, or heavy loads. These specialized solutions provide industries with reliable and durable bearing options that are optimized for their specific needs.

Reduced Maintenance and Lubrication:

Advancements in nylon sleeve bearing technology have contributed to reduced maintenance and lubrication requirements. Self-lubricating properties have been enhanced through the incorporation of solid lubricants or additives within the nylon material. This reduces the need for frequent lubrication and minimizes the risk of lubricant contamination or breakdown. The improved self-lubrication characteristics of nylon bearings result in lower maintenance costs, extended bearing life, and improved operational efficiency in various applications.

Environmental Friendliness:

Innovations in nylon sleeve bearing technology have also focused on improving their environmental friendliness. Manufacturers are developing sustainable and eco-friendly nylon formulations by utilizing recycled materials or bio-based polymers. These advancements align with the increasing demand for environmentally conscious solutions in industries. The use of eco-friendly nylon sleeve bearings contributes to reducing the environmental impact of industrial operations and promotes sustainable practices.

In summary, innovations and advancements in nylon sleeve bearing technology have a profound impact on their use. Improved performance characteristics, expanded application range, specialized solutions, reduced maintenance and lubrication requirements, and environmental friendliness are among the key benefits arising from these advancements. As the technology continues to evolve, nylon sleeve bearings are becoming more versatile, reliable, and sustainable, meeting the evolving needs of various industries and driving advancements in engineering and design practices.

nylon sleeve bearing

Can nylon sleeve bearings be customized or machined for unique industrial needs?

Yes, nylon sleeve bearings can be customized or machined to meet unique industrial needs. Here’s a detailed explanation of the customization and machining possibilities for nylon sleeve bearings:

Custom Sizes and Dimensions:

Specialized Formulations:

Lubrication Modifications:

Machining and Secondary Operations:

Additional Features or Coatings:

nylon sleeve bearing

How does the self-lubricating property of nylon contribute to smooth operation in bearings?

The self-lubricating property of nylon plays a crucial role in ensuring smooth operation in bearings. Here’s a detailed explanation of how the self-lubricating property of nylon contributes to smooth operation:

Nylon is a thermoplastic material that exhibits inherent self-lubricating properties. It has a low coefficient of friction, which means it can reduce the resistance between moving parts, resulting in smoother operation. The self-lubricating property of nylon in bearings offers several advantages:

Reduced Friction:

The self-lubricating property of nylon helps to reduce friction between the bearing surfaces. Friction is a force that opposes the relative motion between two surfaces in contact. By reducing friction, nylon bearings experience less resistance during movement, resulting in smoother and more efficient operation. This reduction in friction also helps to minimize wear and extend the lifespan of the bearing.

Elimination of External Lubrication:

Unlike many other types of bearings, nylon sleeve bearings do not require external lubrication such as oil or grease. The self-lubricating property of nylon allows it to generate a thin film of lubricant on its surface during operation. This lubricating film reduces the direct contact between the bearing surfaces, minimizing friction and wear. The elimination of external lubrication simplifies maintenance requirements and reduces the risk of contamination or leakage in certain applications.

Consistent Lubrication:

Nylon’s self-lubricating property provides consistent lubrication throughout the bearing’s lifespan. As the bearing moves, the friction generates heat, which helps to melt the nylon material slightly. This process releases lubricating particles within the bearing, ensuring a continuous supply of lubrication. This self-lubrication mechanism helps to maintain smooth operation and reduces the risk of dry running or inadequate lubrication that can lead to increased friction, wear, and potential bearing failure.

No Contamination or Leaking:

The self-lubricating property of nylon eliminates the need for external lubricants that can attract dust, dirt, or other contaminants. This is particularly beneficial in applications where cleanliness is critical, such as in the food and beverage industry or medical equipment. Nylon bearings do not suffer from lubricant leakage or contamination issues, ensuring a cleaner and more hygienic operating environment.

Overall, the self-lubricating property of nylon in bearings contributes significantly to smooth operation. It reduces friction, eliminates the need for external lubrication, provides consistent lubrication, and minimizes the risk of contamination or leaking. These advantages make nylon sleeve bearings well-suited for applications where smooth and efficient operation is essential.

Standard
editor by CX 2024-04-13

China manufacturer Tapered Bore Ball Bearing with Adapter Sleeve 1310K 1311K 1312K 1313K 1314K 1315K Self Aligning Ball Bearing Supplier with Best Sales

Product Description

Dimensions(mm)			Basic Load Rating(N)		Weight
Bearing Number	d	D	B	Dyn.C	Stat.C0	kg
1200	10	30	9	5480	1200	0.034
1201	12	32	10	5550	1250	0.04
1202	15	35	11	7480	1750	0.049
1203	17	40	12	7900	2571	0.073
1204	20	47	14	9950	2650	0.116
1205	25	52	15	12000	3300	0.14
1206	30	62	16	15800	4700	0.22
1207	35	72	17	15800	5080	0.32
1208	40	80	18	19200	6400	0.415
1209	45	85	19	21800	7320	0.465
1210	50	90	20	22800	8080	0.531
1211	55	100	21	26800	10000	0.705
1212	60	110	22	35710	11500	0.9
1213	65	120	23	31000	12500	1.15
1214	70	125	24	34500	13500	1.24
1215	75	130	25	38800	15200	1.39
1216	80	140	26	39500	16800	1.7
1217	85	150	28	48800	20500	2.06
1218	90	160	30	56500	23200	2.59
1219	95	170	32	63500	27000	3.1
1220	100	180	34	67400	28400	3.7
1224	120	215	42	117000	51000	6.77
1300	10	35	11	7220	1620	0.058
1301	12	37	12	9420	2120	0.067
1302	15	42	13	9500	2280	0.094
1303	17	47	14	12500	3180	0.13
1304	20	52	15	12500	3380	0.165
1305	25	62	17	17800	5050	0.255
1306	30	72	19	21500	6280	0.385
1307	35	80	21	25000	7950	0.51
1308	40	90	23	29500	9500	0.715
1309	45	100	25	38000	12800	0.955
1310	50	110	27	43200	14200	1.2
1311	55	120	29	51500	18200	1.6
1312	60	130	31	57200	21200	1.95
1313	65	140	33	61800	22800	2.42
1314	70	150	35	74500	27500	3
1315	75	160	37	79000	29800	3.55
1316	80	170	39	86700	31400	4.17
1317	85	180	41	97800	37800	5
1318	90	190	43	115000	42000	5.8
1318	90	190	43	115000	42000	5.8
1319	95	200	45	132000	50800	6.7
1320	100	215	47	141000	55000	8.3
1322	110	240	50	161000	70000	12
2200	10	30	14	8000	1800	0.048
2201	12	32	14	8400	1900	0.052
2202	15	35	14	8600	2000	0.056
2203	17	40	16	10400	2500	0.087
2204	20	47	18	16400	4100	0.13
2205	25	52	18	15200	3900	0.16
2206	30	62	20	15200	4600	0.26
2207	35	72	23	21800	6650	0.405
2208	40	80	23	22500	7380	0.505
2209	45	85	23	23200	8000	0.54
2210	50	90	23	23200	8450	0.58
2211	55	100	25	26800	9950	0.8
2212	60	110	28	34000	12500	1.09
2213	65	120	31	43500	16200	1.45
2214	70	125	31	44000	17000	1.5
2215	75	130	31	44200	18000	1.6
2216	80	140	33	48800	25710	2.15
2217	85	150	36	58200	23500	2.67
2218	90	160	40	70000	28500	3.37
2220	100	180	46	97200	40500	4.94
2300	10	35	17	10000	2100	0.08
2301	12	37	17	11400	2600	0.091
2302	15	42	17	11800	2800	0.108
2303	17	47	19	14300	3500	0.168
2304	20	52	21	17800	4750	0.21
2305	25	62	24	24500	6480	0.335
2306	30	72	27	31500	8680	0.5
2307	35	80	31	39200	11000	0.675
2308	40	90	33	44800	13200	0.925
2309	45	100	36	55000	16200	1.23
2310	50	110	40	64500	19800	1.63
2311	55	120	43	75200	23500	2.09
2312	60	130	46	86800	27500	2.6
2313	65	140	48	96000	32500	3.2
2314	70	150	51	110000	37500	3.92
2315	75	160	55	122000	42800	4.78
2316	80	170	58	128000	45500	5.65

Features of self-aligning ball bearings:

APPLICATION

Packaging & Shipping

Please contact us for more pictures of different packing.

Universal Packing	Without any logo on bearings or packing.
JDZ Packing	With our brand JDZ on bearings and packing.
Customized Packing	Depends on buyer’s requirements.
Original Brand Packing	Bearing and packing are both original. Please contact us for pictures.

QUALITY ASSURANCE

100% Quality inspection to ensure the bearings are with good quality before shipping.

Company Profile

We can provide all types bearings and OEM service according to customers’ requirements.

We are a trusted and reliable bearing supplier, choose us to be your good partner!

Our Advantages:

More choices

RFQ:

1. Q: Are you trading company or manufacturer ?
A: We have our own factory , our type is factory + trade.

2. Q: Could you accept OEM and customize?
A: Yes, we can customize products according to your sample or drawing.

3. Q: How long is your delivery time?
A: If stock, within 7 days to ship or based on your order quantity.

4. Q: Could you supply sample for free?
A: Yes, we can offer the sample for free,do you mind to buy a “ticket” for her?

More details, please contact with us. Thanks for your time!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bearing Type:	Self-Aligning Ball Bearing
Number of Row:	Double Row
Hardness:	58-62 HRC
Chamfer:	Light Chamfer or Black Chamfer
Precision Rating:	P0 P6 P5 P4 P2
Bearing Cage:	Nylon / Steel / Brass Cage

Samples:	US$ 1/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

nylon sleeve bearing

What is the role of cage design and materials in nylon sleeve bearing performance and durability?

The cage design and materials used in nylon sleeve bearings play a crucial role in their performance and durability. Here’s a detailed explanation of their role:

Cage Design:

The cage, also known as a retainer or separator, holds the rolling elements of a bearing, such as balls or rollers, in position. In the case of nylon sleeve bearings, the cage design is essential for maintaining proper spacing and alignment of the bearing surfaces. The primary role of the cage design is to ensure that the rolling elements are evenly distributed around the bearing circumference, reducing the risk of uneven loading and premature wear. Additionally, the cage design promotes the circulation of lubricants and prevents the rolling elements from contacting each other, minimizing friction and reducing heat generation.

The cage design also affects the overall stability and smoothness of operation. A well-designed cage reduces vibration, noise, and the risk of unwanted movement or skewing of the rolling elements. It helps maintain consistent bearing geometry and alignment, leading to improved performance and reliability of the nylon sleeve bearing.

Cage Materials:

The materials used in the construction of the cage have a significant impact on the performance and durability of nylon sleeve bearings. Some common cage materials for nylon bearings include various types of plastics, such as reinforced nylon, PTFE (polytetrafluoroethylene), or PEEK (polyetheretherketone).

The choice of cage material depends on factors such as the operating conditions, load requirements, and desired performance characteristics. The cage material should have sufficient strength and rigidity to hold the rolling elements in place under normal operating loads. It should also exhibit good resistance to wear, fatigue, and deformation, ensuring long-term durability and reliable performance.

Furthermore, the cage material should have low friction properties to minimize energy losses and reduce heat generation. This is particularly important in high-speed applications where frictional heat can affect the overall performance and service life of the nylon sleeve bearing.

Additionally, the cage material should be compatible with the operating environment. It should resist the effects of chemicals, lubricants, and temperature variations commonly encountered in the application. The choice of a suitable cage material ensures that the nylon sleeve bearing can withstand the specific environmental conditions and perform reliably over an extended period.

In summary, the cage design and materials in nylon sleeve bearings are critical for their performance and durability. The cage design ensures proper spacing, alignment, and lubrication of the rolling elements, promoting smooth operation and reducing friction and wear. The choice of cage material determines the strength, rigidity, low friction properties, and resistance to environmental factors. By optimizing the cage design and selecting appropriate materials, manufacturers can enhance the performance, reliability, and longevity of nylon sleeve bearings in various industrial applications.

nylon sleeve bearing

Can you explain the installation and alignment considerations for nylon sleeve bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of nylon sleeve bearings. Here’s a detailed explanation of the installation and alignment considerations for nylon sleeve bearings:

Preparation:

Prior to installation, ensure that the bearing housing and shaft are clean, free from debris, and properly sized. Any contaminants or irregularities on the surfaces can affect the fit and performance of the bearing. It is also important to select the appropriate size and type of nylon sleeve bearing suitable for the application requirements and operating conditions.

Lubrication:

Although nylon sleeve bearings have self-lubricating properties, it is recommended to apply a thin layer of compatible lubricant to the bearing and shaft surfaces during installation. This helps facilitate the initial break-in period, reduce friction, and ensure smooth operation. Follow the manufacturer’s guidelines for the appropriate lubricant to use and the recommended amount to apply.

Press-Fit or Slip-Fit:

The installation method for nylon sleeve bearings depends on the specific design and application requirements. In some cases, the bearing may require a press-fit, where it is tightly pressed into the housing or bore using suitable tools or a press. In other instances, a slip-fit may be sufficient, allowing the bearing to be easily inserted by hand or with minimal force. Follow the manufacturer’s instructions or engineering specifications to determine the appropriate installation method.

Alignment:

Proper alignment of nylon sleeve bearings is crucial for their optimal performance and longevity. Misalignment can lead to increased friction, premature wear, and potential bearing failure. Ensure that the bearing is aligned concentrically with the shaft and the housing. Misalignment can be checked using alignment tools or techniques recommended by the manufacturer or industry standards. Adjustments may be necessary to achieve proper alignment, depending on the specific application and operating conditions.

Secure Fastening:

Once the nylon sleeve bearing is installed and aligned correctly, secure it in place using appropriate fasteners, such as set screws or retaining rings, as specified by the manufacturer. Ensure that the fasteners are tightened to the recommended torque or tension to prevent any movement or loosening during operation.

Periodic Inspection and Maintenance:

After installation, it is essential to conduct regular inspections and maintenance to ensure the continued performance of the nylon sleeve bearings. Periodically check for signs of wear, damage, or misalignment. Monitor the operating conditions, lubrication levels, and environmental factors that may affect the bearings. Address any issues promptly to prevent further damage and extend the lifespan of the bearings.

In summary, proper installation and alignment are critical for the optimal performance and longevity of nylon sleeve bearings. Prepare the surfaces, apply suitable lubrication, follow the recommended installation method (press-fit or slip-fit), ensure proper alignment, and secure the bearing with appropriate fasteners. Conduct regular inspections and maintenance to monitor the bearings’ condition and address any issues promptly. Adhering to these considerations can help maximize the performance and lifespan of nylon sleeve bearings.

nylon sleeve bearing

How do nylon sleeve bearings compare to other types of sleeve bearings, such as bronze?

Friction and Lubrication:

Wear Resistance:

Corrosion Resistance:

Load Capacity:

Temperature Range:

Noise and Vibration:

Cost:

China manufacturer Tapered Bore Ball Bearing with Adapter Sleeve 1310K 1311K 1312K 1313K 1314K 1315K Self Aligning Ball Bearing Supplier with Best Sales
editor by CX 2024-04-13

high quality

nylon sleeve bearing

How do innovations and advancements in nylon sleeve bearing technology impact their use?

Improved Performance:

Expanded Application Range:

Specialized Solutions:

Reduced Maintenance and Lubrication:

Environmental Friendliness:

nylon sleeve bearing

What is the impact of proper lubrication and maintenance on the performance and lifespan of nylon sleeve bearings?

Proper lubrication and maintenance have a significant impact on the performance and lifespan of nylon sleeve bearings. Adequate lubrication and regular maintenance help ensure optimal operation, minimize wear, and extend the lifespan of the bearings. Here’s a detailed explanation of the impact of proper lubrication and maintenance on nylon sleeve bearings:

Reduction of Friction and Wear:

Proper lubrication creates a thin film or layer of lubricant between the bearing surfaces, reducing friction and minimizing wear. Nylon sleeve bearings rely on this lubricating film to reduce direct contact between the moving parts. Insufficient or inadequate lubrication can lead to increased friction, heat generation, and accelerated wear, potentially causing premature failure of the bearings. Regular lubrication and maintenance ensure that the bearings continue to operate smoothly and efficiently, minimizing friction-related issues and extending their lifespan.

Prevention of Dry Running:

Dry running, which refers to the operation of bearings without sufficient lubrication, can be detrimental to the performance and lifespan of nylon sleeve bearings. Without proper lubrication, the bearing surfaces can experience increased friction, heat buildup, and potential damage. Regular lubrication helps prevent dry running, ensuring that the bearings operate with reduced friction, minimal wear, and improved longevity.

Protection Against Contamination:

Adequate lubrication acts as a protective barrier, preventing contaminants such as dust, dirt, moisture, and debris from entering the bearing surfaces. Contamination can cause abrasive wear, corrosion, and other forms of damage to the bearings. Proper lubrication and maintenance practices help maintain a clean and controlled operating environment, reducing the risk of contamination and preserving the performance and lifespan of the nylon sleeve bearings.

Temperature Regulation:

Lubrication plays a crucial role in temperature regulation within nylon sleeve bearings. During operation, friction generates heat, and proper lubrication helps dissipate this heat, preventing excessive temperature rise. Overheating can lead to thermal damage, degradation of the nylon material, and a decrease in bearing performance. Regular lubrication ensures that the bearings remain within the appropriate temperature range, promoting optimal functioning and prolonging their lifespan.

Identification of Issues:

Regular maintenance and lubrication routines provide opportunities to inspect nylon sleeve bearings for signs of wear, damage, misalignment, or other issues. By closely monitoring the condition of the bearings, any potential problems can be detected early on, allowing for timely repairs or replacements. This proactive approach to maintenance can prevent catastrophic failures, minimize downtime, and extend the overall lifespan of the bearings.

In summary, proper lubrication and maintenance have a profound impact on the performance and lifespan of nylon sleeve bearings. They reduce friction and wear, prevent dry running, protect against contamination, regulate temperature, and facilitate the early detection of issues. By following recommended lubrication practices and conducting regular maintenance, users can optimize the operation, minimize wear, and extend the lifespan of their nylon sleeve bearings.

nylon sleeve bearing

How do nylon sleeve bearings compare to other types of sleeve bearings, such as bronze?

Friction and Lubrication:

Wear Resistance:

Corrosion Resistance:

Load Capacity:

Temperature Range:

Noise and Vibration:

Cost:

high quality
editor by CX 2024-04-12

China manufacturer Double Row Bearing 11305 Self Aligning Ball Bearing 1306K+H306 Bearing with Adapter Sleeve bearing distributors

Product Description

Dimensions(mm)			Basic Load Rating(N)		Weight
Bearing Number	d	D	B	Dyn.C	Stat.C0	kg
1200	10	30	9	5480	1200	0.034
1201	12	32	10	5550	1250	0.04
1202	15	35	11	7480	1750	0.049
1203	17	40	12	7900	2571	0.073
1204	20	47	14	9950	2650	0.116
1205	25	52	15	12000	3300	0.14
1206	30	62	16	15800	4700	0.22
1207	35	72	17	15800	5080	0.32
1208	40	80	18	19200	6400	0.415
1209	45	85	19	21800	7320	0.465
1210	50	90	20	22800	8080	0.531
1211	55	100	21	26800	10000	0.705
1212	60	110	22	35710	11500	0.9
1213	65	120	23	31000	12500	1.15
1214	70	125	24	34500	13500	1.24
1215	75	130	25	38800	15200	1.39
1216	80	140	26	39500	16800	1.7
1217	85	150	28	48800	20500	2.06
1218	90	160	30	56500	23200	2.59
1219	95	170	32	63500	27000	3.1
1220	100	180	34	67400	28400	3.7
1224	120	215	42	117000	51000	6.77
1300	10	35	11	7220	1620	0.058
1301	12	37	12	9420	2120	0.067
1302	15	42	13	9500	2280	0.094
1303	17	47	14	12500	3180	0.13
1304	20	52	15	12500	3380	0.165
1305	25	62	17	17800	5050	0.255
1306	30	72	19	21500	6280	0.385
1307	35	80	21	25000	7950	0.51
1308	40	90	23	29500	9500	0.715
1309	45	100	25	38000	12800	0.955
1310	50	110	27	43200	14200	1.2
1311	55	120	29	51500	18200	1.6
1312	60	130	31	57200	21200	1.95
1313	65	140	33	61800	22800	2.42
1314	70	150	35	74500	27500	3
1315	75	160	37	79000	29800	3.55
1316	80	170	39	86700	31400	4.17
1317	85	180	41	97800	37800	5
1318	90	190	43	115000	42000	5.8
1318	90	190	43	115000	42000	5.8
1319	95	200	45	132000	50800	6.7
1320	100	215	47	141000	55000	8.3
1322	110	240	50	161000	70000	12
2200	10	30	14	8000	1800	0.048
2201	12	32	14	8400	1900	0.052
2202	15	35	14	8600	2000	0.056
2203	17	40	16	10400	2500	0.087
2204	20	47	18	16400	4100	0.13
2205	25	52	18	15200	3900	0.16
2206	30	62	20	15200	4600	0.26
2207	35	72	23	21800	6650	0.405
2208	40	80	23	22500	7380	0.505
2209	45	85	23	23200	8000	0.54
2210	50	90	23	23200	8450	0.58
2211	55	100	25	26800	9950	0.8
2212	60	110	28	34000	12500	1.09
2213	65	120	31	43500	16200	1.45
2214	70	125	31	44000	17000	1.5
2215	75	130	31	44200	18000	1.6
2216	80	140	33	48800	25710	2.15
2217	85	150	36	58200	23500	2.67
2218	90	160	40	70000	28500	3.37
2220	100	180	46	97200	40500	4.94
2300	10	35	17	10000	2100	0.08
2301	12	37	17	11400	2600	0.091
2302	15	42	17	11800	2800	0.108
2303	17	47	19	14300	3500	0.168
2304	20	52	21	17800	4750	0.21
2305	25	62	24	24500	6480	0.335
2306	30	72	27	31500	8680	0.5
2307	35	80	31	39200	11000	0.675
2308	40	90	33	44800	13200	0.925
2309	45	100	36	55000	16200	1.23
2310	50	110	40	64500	19800	1.63
2311	55	120	43	75200	23500	2.09
2312	60	130	46	86800	27500	2.6
2313	65	140	48	96000	32500	3.2
2314	70	150	51	110000	37500	3.92
2315	75	160	55	122000	42800	4.78
2316	80	170	58	128000	45500	5.65

Features of self-aligning ball bearings:

APPLICATION

Packaging & Shipping

Please contact us for more pictures of different packing.

Universal Packing	Without any logo on bearings or packing.
JDZ Packing	With our brand JDZ on bearings and packing.
Customized Packing	Depends on buyer’s requirements.
Original Brand Packing	Bearing and packing are both original. Please contact us for pictures.

QUALITY ASSURANCE

100% Quality inspection to ensure the bearings are with good quality before shipping.

Company Profile

We can provide all types bearings and OEM service according to customers’ requirements.

We are a trusted and reliable bearing supplier, choose us to be your good partner!

Our Advantages:

More choices

RFQ:

1. Q: Are you trading company or manufacturer ?
A: We have our own factory , our type is factory + trade.

2. Q: Could you accept OEM and customize?
A: Yes, we can customize products according to your sample or drawing.

3. Q: How long is your delivery time?
A: If stock, within 7 days to ship or based on your order quantity.

4. Q: Could you supply sample for free?
A: Yes, we can offer the sample for free,do you mind to buy a “ticket” for her?

More details, please contact with us. Thanks for your time!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bearing Type:	Self-Aligning Ball Bearing
Number of Row:	Double Row
Hardness:	58-62 HRC
Chamfer:	Light Chamfer or Black Chamfer
Precision Rating:	P0 P6 P5 P4 P2
Bearing Cage:	Nylon / Steel / Brass Cage

Samples:	US$ 1/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

nylon sleeve bearing

How do nylon sleeve bearings contribute to the reduced maintenance and extended service life of equipment?

Self-Lubricating Properties:

Low Friction and Wear:

Corrosion and Chemical Resistance:

High Load Capacity:

Resistance to Contaminants:

nylon sleeve bearing

How do nylon sleeve bearings perform in wet or corrosive environments?

Nylon sleeve bearings generally perform well in wet or corrosive environments due to their inherent properties and resistance to certain environmental conditions. Here’s a detailed explanation of how nylon sleeve bearings perform in wet or corrosive environments:

Moisture Resistance:

Nylon is inherently moisture-resistant, which makes nylon sleeve bearings suitable for wet environments. Nylon bearings can withstand exposure to water, humidity, and other forms of moisture without significant degradation or loss of performance. The moisture resistance of nylon helps prevent swelling, warping, or dimensional changes in the bearings, ensuring their continued functionality in wet conditions.

Corrosion Resistance:

Nylon sleeve bearings exhibit good resistance to corrosion caused by certain chemicals and substances. They are particularly resistant to alkaline solutions, weak acids, and organic solvents. This corrosion resistance makes nylon bearings suitable for applications where exposure to these corrosive substances is a concern. However, it’s important to note that nylon may not be resistant to all types of corrosive environments, especially those involving strong acids or bases. In such cases, alternative bearing materials may be more appropriate.

Self-Lubrication:

Nylon sleeve bearings have self-lubricating properties, which can be beneficial in wet or corrosive environments. The inherent lubricity of nylon helps reduce friction and wear between the bearing surfaces, even in the absence of external lubrication. This self-lubrication capability allows nylon bearings to operate smoothly and efficiently in wet or corrosive conditions, minimizing the need for additional lubricants that may be washed away or affected by the environment.

Limitations:

While nylon sleeve bearings offer good performance in wet or corrosive environments, there are limitations to consider. Continuous exposure to high levels of moisture or highly corrosive substances may eventually affect the performance and lifespan of nylon bearings. In such cases, alternative bearing materials specifically designed for extreme wet or corrosive conditions, such as stainless steel or specialized polymers, may be more suitable.

It’s also important to consider the specific application requirements and consult with bearing manufacturers or experts to ensure the appropriate selection of nylon sleeve bearings for wet or corrosive environments. They can provide guidance on the suitable bearing design, material formulation, and additional protective measures, such as seals or coatings, to enhance the performance and longevity of nylon bearings in such conditions.

In summary, nylon sleeve bearings generally perform well in wet or corrosive environments due to their moisture resistance, corrosion resistance to certain chemicals, and self-lubricating properties. However, their performance may be limited in extreme wet or highly corrosive environments, where alternative bearing materials may be more appropriate. Proper selection, consultation with experts, and consideration of the application requirements are essential to ensure optimal performance and longevity of nylon sleeve bearings in wet or corrosive conditions.

nylon sleeve bearing

Can you explain the advantages of using nylon as a material for sleeve bearings?

Using nylon as a material for sleeve bearings offers several advantages due to its unique properties and characteristics. Here’s a detailed explanation of the advantages of using nylon for sleeve bearings:

Low Friction:

Nylon exhibits low friction properties, which makes it an excellent choice for sleeve bearings. The material’s molecular structure provides inherent lubricity, reducing friction between the bearing and the mating surface. This low-friction characteristic helps minimize energy losses, improve efficiency, and reduce wear on the bearing and the mating components. It also contributes to quieter operation, making nylon sleeve bearings suitable for applications where noise reduction is important.

Self-Lubricating:

Nylon has self-lubricating properties, which means it can operate with minimal or no additional lubrication. The material’s surface has a natural ability to retain and distribute lubricating agents, reducing the need for continuous external lubrication. This feature simplifies maintenance requirements and lowers operating costs. The self-lubricating nature of nylon also helps prevent dry running, which can lead to increased friction, heat generation, and premature wear.

Wear Resistance:

Nylon sleeve bearings offer good wear resistance, allowing them to withstand continuous sliding motion against mating surfaces without significant wear or damage. The material’s durable nature ensures a longer service life and reduces the frequency of bearing replacements. Nylon’s wear resistance is particularly beneficial in applications with high-speed rotation, heavy loads, or abrasive environments, where the bearing is exposed to challenging operating conditions.

Corrosion Resistance:

Nylon is highly resistant to corrosion, making it suitable for applications in moist or corrosive environments. Unlike metal bearings, nylon sleeve bearings do not rust or corrode when exposed to water, chemicals, or most common lubricants. This corrosion resistance extends the lifespan of the bearings and reduces the risk of premature failure. Nylon sleeve bearings can be a cost-effective alternative to metal bearings in applications where corrosion is a concern.

Chemical Resistance:

Another advantage of nylon as a material for sleeve bearings is its excellent chemical resistance. Nylon can withstand exposure to a wide range of chemicals, solvents, and industrial fluids without significant degradation. This property allows nylon sleeve bearings to be used in environments where exposure to chemicals is common, such as chemical processing plants or laboratories. The chemical resistance of nylon ensures the reliability and longevity of the bearings in these demanding applications.

Lightweight:

Nylon is a lightweight material, making it advantageous for applications that require weight reduction or where low inertia is essential. Compared to traditional metal bearings, nylon sleeve bearings contribute to overall weight savings in machinery and equipment. The reduced weight can lead to improved energy efficiency, reduced operating costs, and easier handling during installation and maintenance.

Cost-Effectiveness:

Nylon sleeve bearings are often more cost-effective than metal bearings. Nylon is a readily available and cost-efficient material, making the manufacturing of nylon bearings economical. Additionally, the self-lubricating properties of nylon reduce the need for additional lubricants and maintenance, resulting in lower operating costs over time. The extended service life and reduced replacement frequency of nylon sleeve bearings also contribute to cost savings.

In summary, using nylon as a material for sleeve bearings offers several advantages, including low friction, self-lubrication, wear resistance, corrosion resistance, chemical resistance, lightweight construction, and cost-effectiveness. These characteristics make nylon sleeve bearings a popular choice in various applications, providing reliable and efficient operation while minimizing maintenance requirements and overall costs.

China manufacturer Double Row Bearing 11305 Self Aligning Ball Bearing 1306K+H306 Bearing with Adapter Sleeve bearing distributors
editor by CX 2024-04-12

Custom

nylon sleeve bearing

How do innovations and advancements in nylon sleeve bearing technology impact their use?

Improved Performance:

Expanded Application Range:

Specialized Solutions:

Reduced Maintenance and Lubrication:

Environmental Friendliness:

nylon sleeve bearing

Are there variations in nylon sleeve bearing designs and materials for specific applications?

Yes, there are variations in nylon sleeve bearing designs and materials to accommodate specific applications. Different applications may have unique requirements in terms of load capacity, operating conditions, environmental factors, and desired performance characteristics. Here’s a detailed explanation of the variations in nylon sleeve bearing designs and materials for specific applications:

Design Variations:

Nylon sleeve bearings can be designed in various configurations to meet specific application needs. Some common design variations include:

Straight Sleeve Bearings: These are the most basic design, featuring a cylindrical shape with a straight bore. They are suitable for applications with moderate loads and low speeds.
Flanged Sleeve Bearings: These bearings have an added flange on one end, which provides axial support and helps in proper alignment. Flanged bearings are often used in applications where axial movement needs to be restricted.
Thrust Washers: These are flat or washer-like nylon bearings that are used to provide axial support and reduce friction between moving parts in thrust applications.
Customized Designs: In some cases, nylon sleeve bearings can be customized or engineered to meet specific application requirements. This may involve modifications in dimensions, shapes, or features to optimize performance.

Material Variations:

While nylon is the primary material used for sleeve bearings, there are variations in the composition and formulation of nylon to suit different applications. Some common material variations include:

Standard Nylon: This is the most commonly used nylon material for sleeve bearings. It offers good wear resistance, low friction, and self-lubricating properties.
Reinforced Nylon: Reinforced nylon bearings are infused with fillers such as glass fibers or other additives to enhance their mechanical properties. These bearings exhibit improved strength, stiffness, and higher load-carrying capacity compared to standard nylon bearings.
Food-Grade Nylon: Nylon bearings can be manufactured from food-grade or FDA-approved nylon materials. These bearings are designed to meet strict hygiene and safety standards and are suitable for applications in the food and beverage industry.
High-Temperature Nylon: For applications involving elevated temperatures, special high-temperature nylon formulations are available. These bearings can withstand higher operating temperatures without significant loss of mechanical properties.
Chemically Resistant Nylon: In applications where exposure to chemicals or corrosive substances is a concern, chemically resistant nylon bearings are used. These bearings are formulated to resist degradation or damage from specific chemicals.

The choice of nylon sleeve bearing design and material depends on the specific application requirements and operating conditions. Engineers and designers consider factors such as load capacity, speed, temperature, environmental conditions, lubrication needs, and industry regulations when selecting the appropriate design and material for their applications.

In summary, there are variations in nylon sleeve bearing designs and materials to cater to specific applications. Design variations include straight sleeve bearings, flanged sleeve bearings, thrust washers, and customized designs. Material variations include standard nylon, reinforced nylon, food-grade nylon, high-temperature nylon, and chemically resistant nylon. The selection of design and material depends on the unique requirements and operating conditions of the application.

nylon sleeve bearing

What are the key applications and industries where nylon sleeve bearings are commonly used?

Automotive Industry:

Industrial Machinery:

Electrical and Electronics:

Medical and Healthcare:

Agricultural Machinery:

Food and Beverage:

Marine and Water Applications:

Recreational and Sports Equipment:

Custom Custom
editor by CX 2024-04-12

China best Adapter Sleeve Ball Bearing 2206K+H306 Self Aligning Ball Bearing 11505 Bearing Size 25X62X20mm with Good quality

Product Description

Dimensions(mm)			Basic Load Rating(N)		Weight
Bearing Number	d	D	B	Dyn.C	Stat.C0	kg
1200	10	30	9	5480	1200	0.034
1201	12	32	10	5550	1250	0.04
1202	15	35	11	7480	1750	0.049
1203	17	40	12	7900	2571	0.073
1204	20	47	14	9950	2650	0.116
1205	25	52	15	12000	3300	0.14
1206	30	62	16	15800	4700	0.22
1207	35	72	17	15800	5080	0.32
1208	40	80	18	19200	6400	0.415
1209	45	85	19	21800	7320	0.465
1210	50	90	20	22800	8080	0.531
1211	55	100	21	26800	10000	0.705
1212	60	110	22	35710	11500	0.9
1213	65	120	23	31000	12500	1.15
1214	70	125	24	34500	13500	1.24
1215	75	130	25	38800	15200	1.39
1216	80	140	26	39500	16800	1.7
1217	85	150	28	48800	20500	2.06
1218	90	160	30	56500	23200	2.59
1219	95	170	32	63500	27000	3.1
1220	100	180	34	67400	28400	3.7
1224	120	215	42	117000	51000	6.77
1300	10	35	11	7220	1620	0.058
1301	12	37	12	9420	2120	0.067
1302	15	42	13	9500	2280	0.094
1303	17	47	14	12500	3180	0.13
1304	20	52	15	12500	3380	0.165
1305	25	62	17	17800	5050	0.255
1306	30	72	19	21500	6280	0.385
1307	35	80	21	25000	7950	0.51
1308	40	90	23	29500	9500	0.715
1309	45	100	25	38000	12800	0.955
1310	50	110	27	43200	14200	1.2
1311	55	120	29	51500	18200	1.6
1312	60	130	31	57200	21200	1.95
1313	65	140	33	61800	22800	2.42
1314	70	150	35	74500	27500	3
1315	75	160	37	79000	29800	3.55
1316	80	170	39	86700	31400	4.17
1317	85	180	41	97800	37800	5
1318	90	190	43	115000	42000	5.8
1318	90	190	43	115000	42000	5.8
1319	95	200	45	132000	50800	6.7
1320	100	215	47	141000	55000	8.3
1322	110	240	50	161000	70000	12
2200	10	30	14	8000	1800	0.048
2201	12	32	14	8400	1900	0.052
2202	15	35	14	8600	2000	0.056
2203	17	40	16	10400	2500	0.087
2204	20	47	18	16400	4100	0.13
2205	25	52	18	15200	3900	0.16
2206	30	62	20	15200	4600	0.26
2207	35	72	23	21800	6650	0.405
2208	40	80	23	22500	7380	0.505
2209	45	85	23	23200	8000	0.54
2210	50	90	23	23200	8450	0.58
2211	55	100	25	26800	9950	0.8
2212	60	110	28	34000	12500	1.09
2213	65	120	31	43500	16200	1.45
2214	70	125	31	44000	17000	1.5
2215	75	130	31	44200	18000	1.6
2216	80	140	33	48800	25710	2.15
2217	85	150	36	58200	23500	2.67
2218	90	160	40	70000	28500	3.37
2220	100	180	46	97200	40500	4.94
2300	10	35	17	10000	2100	0.08
2301	12	37	17	11400	2600	0.091
2302	15	42	17	11800	2800	0.108
2303	17	47	19	14300	3500	0.168
2304	20	52	21	17800	4750	0.21
2305	25	62	24	24500	6480	0.335
2306	30	72	27	31500	8680	0.5
2307	35	80	31	39200	11000	0.675
2308	40	90	33	44800	13200	0.925
2309	45	100	36	55000	16200	1.23
2310	50	110	40	64500	19800	1.63
2311	55	120	43	75200	23500	2.09
2312	60	130	46	86800	27500	2.6
2313	65	140	48	96000	32500	3.2
2314	70	150	51	110000	37500	3.92
2315	75	160	55	122000	42800	4.78
2316	80	170	58	128000	45500	5.65

Features of self-aligning ball bearings:

APPLICATION

Packaging & Shipping

Please contact us for more pictures of different packing.

Universal Packing	Without any logo on bearings or packing.
JDZ Packing	With our brand JDZ on bearings and packing.
Customized Packing	Depends on buyer’s requirements.
Original Brand Packing	Bearing and packing are both original. Please contact us for pictures.

QUALITY ASSURANCE

100% Quality inspection to ensure the bearings are with good quality before shipping.

Company Profile

We can provide all types bearings and OEM service according to customers’ requirements.

We are a trusted and reliable bearing supplier, choose us to be your good partner!

Our Advantages:

More choices

RFQ:

1. Q: Are you trading company or manufacturer ?
A: We have our own factory , our type is factory + trade.

2. Q: Could you accept OEM and customize?
A: Yes, we can customize products according to your sample or drawing.

3. Q: How long is your delivery time?
A: If stock, within 7 days to ship or based on your order quantity.

4. Q: Could you supply sample for free?
A: Yes, we can offer the sample for free,do you mind to buy a “ticket” for her?

More details, please contact with us. Thanks for your time!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bearing Type:	Self-Aligning Ball Bearing
Number of Row:	Double Row
Hardness:	58-62 HRC
Chamfer:	Light Chamfer or Black Chamfer
Precision Rating:	P0 P6 P5 P4 P2
Bearing Cage:	Nylon / Steel / Brass Cage

Samples:	US$ 1/Set 1 Set(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

nylon sleeve bearing

What is the role of cage design and materials in nylon sleeve bearing performance and durability?

The cage design and materials used in nylon sleeve bearings play a crucial role in their performance and durability. Here’s a detailed explanation of their role:

Cage Design:

Cage Materials:

nylon sleeve bearing

What are the potential challenges or limitations of using nylon sleeve bearings in specific industries?

High Load and Impact Applications:

Elevated Temperatures:

Chemical Exposure:

Hydrolysis:

Speed Limitations:

nylon sleeve bearing

What are nylon sleeve bearings, and how are they used in machinery and equipment?

Construction and Material:

Low-Friction Operation:

Wear and Corrosion Resistance:

Versatility and Design Flexibility:

Applications in Machinery and Equipment:

Nylon sleeve bearings find applications in a wide range of machinery and equipment across various industries. Some common uses include:

Automotive Industry: Nylon sleeve bearings are used in automotive components such as suspension systems, steering columns, and throttle linkages. They provide smooth and reliable operation while withstanding the demanding conditions of the automotive environment.
Industrial Machinery: Nylon sleeve bearings are employed in industrial machinery, including conveyor systems, pumps, fans, and electric motors. They help reduce friction, absorb shocks and vibrations, and provide long-lasting performance under heavy loads.
Home Appliances: Nylon sleeve bearings are utilized in various home appliances such as washing machines, dishwashers, and refrigerators. They contribute to quiet operation, durability, and smooth movement of rotating components.
Office Equipment: Nylon sleeve bearings can be found in office equipment like printers, scanners, and copiers. They ensure smooth and reliable movement of paper feed mechanisms, rollers, and other moving parts.
Sports Equipment: Nylon sleeve bearings are used in sports equipment, including bicycles, skateboards, and fitness machines. They provide low-friction performance, durability, and resistance to moisture and corrosion.

China best Adapter Sleeve Ball Bearing 2206K+H306 Self Aligning Ball Bearing 11505 Bearing Size 25X62X20mm with Good quality
editor by CX 2024-04-12

China best 1209K+H209 Self-Aligning Ball Bearing 1209K+H209 with Adapter Sleeve 1209K+H209 ball bearing

Product Description

Product Parameters

Self aligning ball bearings mainly bear radial loads and can also withstand small axial loads. The axial displacement of the
shaft (shell) is limited within the clearance limit, with automatic centering performance, allowing normal operation under
conditions of relatively small internal and external inclination. It is suitable for components where the support seat hole cannot
strictly guarantee coaxiality. Self aligning ball bearings are suitable for bearing heavy and impact loads, precision instruments,
low noise motors, automobiles, motorcycles, metallurgy, rolling mills, mines, petroleum, papermaking, cement, sugar squeezing
and other industries, as well as general machinery.

Type	BALL
Structure	Self-Aligning
Applicable Industries	Food Shop, Energy & Mining, Food & Beverage Shops, Advertising Company
Precision Rating	P0 P6 P5 P4 P2
Seals Type	OPEN OR SEAL
Number of Row	Double row
Product name	Self-aligning Roller Bearing

Our business:Produce and customize various bearing brands. (Packaging and logo can be customized. All copyright belongs to the customer. We promise not to disclose any information.)

Self-aligning ball bearings	1200series	1226
	1300series
	2200series
	2300series

Company Profile

Product Name:	Self-Aligning Ball Bearing
Material:	Bearing Steel
Cage Material:	Steel /Copper /Nylon Cage
Seal Type:	Open
Weight:	0.26kg
Aligning:	Aligning Bearing

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Request Sample

How do nylon sleeve bearings contribute to the reduced maintenance and extended service life of equipment?

Self-Lubricating Properties:

Low Friction and Wear:

Corrosion and Chemical Resistance:

High Load Capacity:

Resistance to Contaminants:

nylon sleeve bearing

What is the impact of proper lubrication and maintenance on the performance and lifespan of nylon sleeve bearings?

Reduction of Friction and Wear:

Prevention of Dry Running:

Protection Against Contamination:

Temperature Regulation:

Identification of Issues:

nylon sleeve bearing

How do nylon sleeve bearings compare to other types of sleeve bearings, such as bronze?

Friction and Lubrication:

Wear Resistance:

Corrosion Resistance:

Load Capacity:

Temperature Range:

Noise and Vibration:

Cost:

China best 1209K+H209 Self-Aligning Ball Bearing 1209K+H209 with Adapter Sleeve 1209K+H209 ball bearing
editor by CX 2024-03-27